Perhaps a stupid question but do you have the kernel sources in /usr/src/linux ? They are needed to compile the cloop module.Originally Posted by donnek
So far as I know, cloop is not available on 8.2. I have downloaded the source, and run make cloneconfig and make dep to get a configure file. However, trying to make KERNEL_DIR=/usr/src/linux asks for a conf.vars file, which I don't have. If I touch that file, the make proceeds, but on insmod I get a message about unresolved symbols. Can anyone give me any ideas on what i might be doing wrong?
Thanks, Kevin
Perhaps a stupid question but do you have the kernel sources in /usr/src/linux ? They are needed to compile the cloop module.Originally Posted by donnek
Yes, I installed those - as I said, I ran make cloneconfig and make dep with no problems. But the conf.vars file seems to be the problem - I don't know where it comes from or what its supposed to do - I don't have one.
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$17.99