Results 1 to 3 of 3

Thread: [b]PS/2 Mouse dont work[/b]

  1. #1
    Junior Member
    Join Date
    Feb 2004
    Posts
    2

    [b]PS/2 Mouse dont work[/b]

    My PS/2-Mouse (wheel or not) is not working an stand still in the middle of the screen.

    cheatcode pci=irqmask=0x0e98 donīt fix the problem.
    the FAQ say, it is a Bios Problem ??
    In Fedora Core the mouse works. (include wheel)

    Knoppix 3.2 from cd with
    PS/2 standard mouse or Logitec-Wheel-mouse

    switching the driver section from auto to PS/2 or IMPS/2 in XF86Config donīt fix the Problem

    Can anybody help me ?????

    Here is my Config:

    Section "ServerLayout"
    Identifier "XFree86 Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "PS/2 Mouse" "CorePointer"
    # Serial Mouse not detected
    # USB Mouse not detected
    EndSection

    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"

    EndSection

    Section "Files"
    RgbPath "/usr/X11R6/lib/X11/rgb"
    ModulePath "/usr/X11R6/lib/modules"
    FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/misc"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath "/usr/X11R6/lib/X11/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
    # FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
    FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
    EndSection

    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "GLcore"
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "speedo"
    Load "type1"
    Load "freetype"
    Load "record"
    EndSection

    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc104"
    Option "XkbLayout" "de"
    Option "XkbVariant" "nodeadkeys"
    EndSection

    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection

    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection

    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection

    # Auto-generated by KNOPPIX mkxf86config

    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    VendorName "ACT"
    ModelName "ACTc021"
    HorizSync 31 - 95 # DDC-probed
    VertRefresh 50 - 120 # DDC-probed
    # These are the DDC-probed settings reported by your monitor.
    # 1600x1200, 75.0Hz; hfreq=93.75, vfreq=75.00
    ModeLine "1600x1200" 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1280x1024, 85.0Hz; hfreq=91.15, vfreq=85.02
    ModeLine "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    # 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00
    ModeLine "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    # 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06
    ModeLine "800x600" 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync
    # 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
    ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
    # 800x600, 72.0Hz; hfreq=48.08, vfreq=72.19
    ModeLine "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
    # 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
    ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
    # 640x480, 85.0Hz; hfreq=43.27, vfreq=85.01
    ModeLine "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
    # 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
    ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
    # 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
    ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync
    EndSection

    Section "Device"
    ### Available Driver options are:-
    # sw_cursor is needed for some ati and radeon cards
    #Option "sw_cursor"
    #Option "hw_cursor"
    #Option "NoAccel"
    #Option "ShowCache"
    #Option "ShadowFB"
    #Option "UseFBDev"
    #Option "Rotate"
    Identifier "Card0"
    # The following line is auto-generated by KNOPPIX mkxf86config
    Driver "vesa"
    VendorName "All"
    BoardName "All"
    # BusID "PCI:1:0:0"
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 16
    SubSection "Display"
    Depth 1
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection

    Section "DRI"
    Mode 0666
    EndSection

    --------------------------------------------------

    And here lspci -v

    00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 44)
    Subsystem: Elitegroup Computer Systems: Unknown device 0954
    Flags: bus master, medium devsel, latency 0
    Memory at d8000000 (32-bit, prefetchable) [size=64M]
    Capabilities: <available only to root>

    00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
    Flags: bus master, 66Mhz, medium devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    Memory behind bridge: dc000000-ddffffff
    Prefetchable memory behind bridge: d0000000-d7ffffff
    Capabilities: <available only to root>

    00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 23)
    Subsystem: VIA Technologies, Inc. VT82C596/A/B PCI to ISA Bridge
    Flags: bus master, stepping, medium devsel, latency 0

    00:07.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP])
    Flags: bus master, medium devsel, latency 32
    I/O ports at d000 [size=16]
    Capabilities: <available only to root>

    00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 11) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
    Flags: bus master, medium devsel, latency 32, IRQ 10
    I/O ports at d400 [size=32]
    Capabilities: <available only to root>

    00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 30)
    Flags: medium devsel

    00:09.0 VGA compatible controller: NVidia / SGS Thomson (Joint Venture) Riva128 (rev 10) (prog-if 00 [VGA])
    Subsystem: Elsa AG VICTORY Erazor
    Flags: bus master, medium devsel, latency 32, IRQ 11
    Memory at de000000 (32-bit, non-prefetchable) [size=16M]
    Memory at df000000 (32-bit, prefetchable) [size=16M]
    Expansion ROM at <unassigned> [disabled] [size=4M]

    00:0b.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
    Subsystem: Adaptec AHA-2940UW SCSI Host Adapter
    Flags: bus master, medium devsel, latency 32, IRQ 5
    I/O ports at dc00 [size=256]
    Memory at e1000000 (32-bit, non-prefetchable) [size=4K]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: <available only to root>

    00:0c.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 43)
    Subsystem: D-Link System Inc DFE-530TX rev A
    Flags: bus master, medium devsel, latency 32, IRQ 10
    I/O ports at e000 [size=256]
    Memory at e1001000 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: <available only to root>

    00:0d.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
    Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
    Flags: bus master, medium devsel, latency 32, IRQ 10
    I/O ports at e400 [size=256]
    Capabilities: <available only to root>

    01:00.0 VGA compatible controller: S3 Inc. Savage 4 (rev 04) (prog-if 00 [VGA])
    Subsystem: S3 Inc. 86C394-397 Savage4
    Flags: 66Mhz, medium devsel, IRQ 11
    Memory at dd000000 (32-bit, non-prefetchable) [disabled] [size=512K]
    Memory at d0000000 (32-bit, prefetchable) [disabled] [size=128M]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: <available only to root>

    --------------------------------------------------

    And here my Bios:

    BIOS Date: 06/22/00
    BIOS Type: Award Modular BIOS v4.51PG
    BIOS ID: 06/22/2000-693-596-W977E-P6BAT-APC
    OEM Sign-On: P6BAT-AP Ver 5.6 06/22/2000
    Chipset: VIA 82C691 rev 68
    Superio: Unknown
    OS: WinXP
    CPU: INTEL(R) CELERON(TM) 466 Mhz MAX: 500 Mhz
    BIOS ROM In Socket: Yes
    BIOS ROM Size: 256K
    Memory Installed: 384 MB
    Memory Maximum: Unknown
    Memory Slot 01: 128 MB
    Memory Slot 02: 128 MB
    Memory Slot 03: 128 MB
    Memory Slot 04: 0 MB

  2. #2
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479

    Re: [b]PS/2 Mouse dont work[/b]

    Quote Originally Posted by bharry

    Here is my Config:

    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Try this instead.
    Code:
    Section "InputDevice"
            Identifier  "PS/2 Mouse"
            Driver      "mouse"
            Option      "CorePointer"
            Option      "Protocol" "ImPS/2"
            Option      "Device" "/dev/psaux"
            Option      "Emulate3Buttons"  "True"
            Option      "ZAxisMapping"  "4 5"
    EndSection

  3. #3
    Junior Member
    Join Date
    Feb 2004
    Posts
    2

    ImPS/2 is not working

    Thank you for your tip, but it is still not working.

    I have tried PS/2 and ImPS/2 with a standard PS/2 mouse and a wheelmouse.

    I canīt believe that. An Operating system that dont know a PS/2 mouse.

    Can anybody fix this problem ?
    Please !

Similar Threads

  1. xmms and other sound apps dont work
    By Kreator in forum Hardware & Booting
    Replies: 3
    Last Post: 02-03-2004, 07:45 AM
  2. Call me Crazy- my user and root and admin password dont work
    By dennison_b in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 11-07-2003, 05:04 AM
  3. Replies: 1
    Last Post: 10-24-2003, 11:37 PM
  4. background-taps dont work on this forum
    By Superstoned in forum The Lounge
    Replies: 1
    Last Post: 09-15-2003, 05:22 PM
  5. how to make my Mouse Systems mouse work with knoppix?
    By clfest in forum Hardware & Booting
    Replies: 8
    Last Post: 04-30-2003, 01:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco 2901 Integrated Services Router picture

Cisco 2901 Integrated Services Router

$50.99



Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP picture

Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP

$419.99



Cisco C819H-K9 Secure Hardened 4 Ports Router 1 Year Warranty picture

Cisco C819H-K9 Secure Hardened 4 Ports Router 1 Year Warranty

$175.00



Cisco Nexus N55-D160L3-V2 2 Ports Daughter Card Expansion Module 1 Year Warranty picture

Cisco Nexus N55-D160L3-V2 2 Ports Daughter Card Expansion Module 1 Year Warranty

$395.00



Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod picture

Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod

$79.00



Cisco Nexus N3K-C3048TP-1GE 48 Port Switch w/ Dual Power - Same Day Shipping picture

Cisco Nexus N3K-C3048TP-1GE 48 Port Switch w/ Dual Power - Same Day Shipping

$85.99



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



Cisco Catalyst 3850 Series 48-Port UPoE Gigabit Switch w/ C3850-NM-2-10G (BHN) picture

Cisco Catalyst 3850 Series 48-Port UPoE Gigabit Switch w/ C3850-NM-2-10G (BHN)

$98.96



Cisco C9300-48U-A 48-Port Gig UPoE Network Advantage Switch -Same Day Shipping picture

Cisco C9300-48U-A 48-Port Gig UPoE Network Advantage Switch -Same Day Shipping

$859.95



Cisco Nexus N3K-C3172PQ-XL 48P 10GbE SFP+ 4P QSFP+ Switch N3K-C3172PQ-XL-F picture

Cisco Nexus N3K-C3172PQ-XL 48P 10GbE SFP+ 4P QSFP+ Switch N3K-C3172PQ-XL-F

$229.00