Have a look at http://www.linuxprinting.org/
They even have some suggestions.
Currently, I have a Dell Dimension 4500 (Intel 2GHz w/512K) attached to both an Epson Stylus Photo 2200 and an HP OfficeJet K60 via USB. Everything works under Winbloze XP.
However, in Linux (Knoppix Live, not installed):
Knoppix | Configure | Configure Printers | Add printer.... blah blah blah.
Knoppix sees the printers and lists them by name and model but won't print to them through USB. (Though I didn't try "Raw" printing as I did below.
Knoppix sees the printers and lists them by name and model but won't print to them through LPT1 *unless* I treat them as "Raw" printers (no driver needed). I don't need *much* more than an ASCII printer, but I do need *some* more than an ASCII printer.
Where's the rub? Any other Dell people having this prob? I'm hoping it's the "complicated" printers. If so, what's a cheap jet type printer that works plug-and-pray with Knoppix/Linux. I only need it for desktop publishing: nice, crisp fonts. Color wouldn't suck but I won't be printing photos with this thing. Oh... USB would be nice assuming it isn't part of the problem.
Suggestions?
Have a look at http://www.linuxprinting.org/
They even have some suggestions.
Seagate 10TB 7200RPM 12Gbps 3.5in SAS Hard Drive ST10000NM096
$79.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
Dell ST2000NX0403 2T SATA 2.5 inch 7.2K CK3MN server hard drive
$45.00
Toshiba 4TB, SATA 3, 3.5'' Internal Hard Drive (MG03ACA400)
$48.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.88
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$69.99
Western Digital WD10JUCT 1TB 2.5" SATA 3Gb/s 5400 RPM 16MB Laptop Hard Drive
$17.98
HGST 0F27352 10TB 3.5" SAS 7200 RPM 12Gb/s Hard Drive 100% #73 v
$65.00