You can try passing this at boot:
mem=384M
Just change it to reflect your amount of RAM.
Trying to Boot from CD.... can do successfully from old system but get following error messages on current one...
initrd extends beyond end of memory (0x0bff>ad0> 0x0bff0000)
kernel panic: VFS: Unable to mount root fs on 0:01
Does anyone understand this???
And am I posting in the right place???![]()
You can try passing this at boot:
mem=384M
Just change it to reflect your amount of RAM.
Thank you for suggestion. Have already tried that using
mem=256M
But didn't make any difference.
![]()
Yay!!!! Problem solved!!
Tried again using mem=230M... no luck... so tried again using mem=192M as have 64M shared with graphics.... no luck.... tried using mem=190M... just for the heck!!! and BINGO... it worked!!!!!!!
Shrug!!!!!![]()
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$44.55
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00