Last night I was on the tech team for a lan party at my university. They don't let us have an internet connection so its a closed network.
I ran dhcp3d and had some good results. The network was 100Mbit and about 80 computers (averaged during the 12 hours we were there).
I wanted to run bind9 and it would not serve the zone files I had configured.
I had the dhcp server on 192.168.53.1 and wanted it to be called www.com
on 192.168.53.3 was ftp.com
on 192.168.53.4 was files1.com
on 192.168.53.5 was files2.com
It seems simple but I just couldn't get it. Could somebody give me some sample zone files so I can compare them to what I had?
The servers served over 100 gigs of data (mostly ISO's for people to use). At one point disk throughput was the limiting factor from the ftp server.
On the dhcp/dns server I think something wasn't running right.
With just dhcp, cron(for webalizer logs), dns, and ssh running it was using 118 megs of ram. I also only had the required modules running. removed all of the sound modules & extra filesystem modules and it was still using quite a bit of resources. Is this normal usage?
TIA
~ryan
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell R730xd 12LFF 2.6Ghz 20-C 128GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails
$721.05
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99