Last night I was on the tech team for a lan party at my university. They don't let us have an internet connection so its a closed network.
I ran dhcp3d and had some good results. The network was 100Mbit and about 80 computers (averaged during the 12 hours we were there).
I wanted to run bind9 and it would not serve the zone files I had configured.
I had the dhcp server on 192.168.53.1 and wanted it to be called www.com
on 192.168.53.3 was ftp.com
on 192.168.53.4 was files1.com
on 192.168.53.5 was files2.com
It seems simple but I just couldn't get it. Could somebody give me some sample zone files so I can compare them to what I had?
The servers served over 100 gigs of data (mostly ISO's for people to use). At one point disk throughput was the limiting factor from the ftp server.
On the dhcp/dns server I think something wasn't running right.
With just dhcp, cron(for webalizer logs), dns, and ssh running it was using 118 megs of ram. I also only had the required modules running. removed all of the sound modules & extra filesystem modules and it was still using quite a bit of resources. Is this normal usage?
TIA
~ryan
IBM System x3550 M4 Server 2 x Intel Xeon E5-2609 36GB RAM No HDDs
$149.99
IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server
$209.98
IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES
$27.25
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
$16000.00
IBM BladeCenter HS21 7995 AC1 Server - 1x Xeon E5440 2GB RAM - NO HDDs
$22.43
IBM SYSTEM x3200 M2 Server - HDD wiped, No OS
$75.00
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server
$359.99
IBM SYSTEM x3650 M4 Xeon E5-2609 2.40GHZ 16GB DDR3-1066MHZ 2x 550W PSU TESTED
$109.95
IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED
$99.99