-
Configuring wireless network with data from Kismet
After a long battle, I seem to have gotten kismet to work. It is capturing packets right now from some unencrypted network. The purpose of this little endeavor of mine was to see if this wireless NIC functions properly, but I don't have a wireless network of my own to test it with. How to I configure my machine to use the network with the information the kismet provides?
I'm running knoppix 3.3 (no hard drive) with what lspci tells me is a wavelan prism2.5 or something to that effect. (It's a linksys wmp11, an older version.) It looks like knoppix loaded the orinoco drivers, and iwconfig shows the interface to be eth0.
Keep in mind that today has been my first adventure into wireless. Any help is appreciated.
-
Senior Member
registered user
Re: Configuring wireless network with data from Kismet
Originally Posted by
berto
After a long battle, I seem to have gotten kismet to work. It is capturing packets right now from some unencrypted network. The purpose of this little endeavor of mine was to see if this wireless NIC functions properly, but I don't have a wireless network of my own to test it with. How to I configure my machine to use the network with the information the kismet provides?
I'm running knoppix 3.3 (no hard drive) with what lspci tells me is a wavelan prism2.5 or something to that effect. (It's a linksys wmp11, an older version.) It looks like knoppix loaded the orinoco drivers, and iwconfig shows the interface to be eth0.
Keep in mind that today has been my first adventure into wireless. Any help is appreciated.
If you want to crack someones network this is not the place to be asking for advice. To test your wireless card you should find someone with a network that will allow you to connect. And depending on the network you try to connect too you could find the police knocking on your door. Any further questions of this nature will be deleted and any responses telling you how to do it will be. I had thought of deleting this one but I figured a reply to your query would be better.
Similar Threads
-
By squard in forum Networking
Replies: 0
Last Post: 03-20-2005, 10:27 PM
-
By ramesh in forum Networking
Replies: 4
Last Post: 01-26-2005, 02:41 PM
-
By JJ in forum Networking
Replies: 0
Last Post: 03-10-2004, 10:56 AM
-
By johnsandidge in forum Networking
Replies: 2
Last Post: 01-06-2004, 04:02 PM
-
By Rggoalie3 in forum General Support
Replies: 4
Last Post: 12-30-2003, 10:55 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
10Gtek ASF-10G-T 10GBase-T 10GbE SFP+ to RJ-45 Copper Optical Transceiver Module
$35.99
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95