Last night I was on the tech team for a lan party at my university. They don't let us have an internet connection so its a closed network.
I ran dhcp3d and had some good results. The network was 100Mbit and about 80 computers (averaged during the 12 hours we were there).
I wanted to run bind9 and it would not serve the zone files I had configured.
I had the dhcp server on 192.168.53.1 and wanted it to be called www.com
on 192.168.53.3 was ftp.com
on 192.168.53.4 was files1.com
on 192.168.53.5 was files2.com
It seems simple but I just couldn't get it. Could somebody give me some sample zone files so I can compare them to what I had?
The servers served over 100 gigs of data (mostly ISO's for people to use). At one point disk throughput was the limiting factor from the ftp server.
On the dhcp/dns server I think something wasn't running right.
With just dhcp, cron(for webalizer logs), dns, and ssh running it was using 118 megs of ram. I also only had the required modules running. removed all of the sound modules & extra filesystem modules and it was still using quite a bit of resources. Is this normal usage?
TIA
~ryan
Supermicro 4U 36 Bay Storage Server 2.2Ghz 16-C 128GB 1x1280W Rails TrueNAS ZFS
$716.98
Dell Poweredge R640 Server | 2x Silver 4114 20 Cores | 96GB | 8x 1.8TB Dell SAS
$2749.99
Dell Poweredge R640 Server | 2x Silver 4114 20 Cores | 192GB | 8x HDD Trays
$1939.99
Dell Poweredge R640 Server | 2x Silver 4114 20 Cores | 64GB | 8x HDD Trays
$1614.99
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
DELL R730XD Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4x 1.2TB SAS 4xRJ45
$504.00