I'm no expert, but I'd have a go with
mkdir /mnt/sdb1
mount /dev/sdb1 /mnt/sdb1
HTH
I am new in Linux.
I have an external Sony DVD writer connected via ieee1394.
When my knoppix boots up, it does not recognise the device. I read a number of articles in this forum and find the rescan-scsi-bus.sh script. I ran the script and then run 'cdrecord -scanbus'. The DVD writer showed up (it was not there before running rescan-scsi-bus.sh).
According to various articles on this forum, the next thing I should do is to mount the device using command lines:
mkdir /mnt/sda1
mount /dev/sda1 /mnt/sda1
However, I have already got a 'sda1' directory under /mnt and an external USB hard drive has been mounted on it.
My question is: what command line(s) that I should issue in order to mount the DVD writer?
Many thanks!
Nigel Leung
I'm no expert, but I'd have a go with
mkdir /mnt/sdb1
mount /dev/sdb1 /mnt/sdb1
HTH
Thanks, but unfortunately, sdb1 is also occupied by another partition of the external hard drive. And by the way, I tried sdc1 and it did not work. So what next?
Originally Posted by c123
the 'a'/'b/'c' etc refers to the device, and '1'/'2'/'3' etc' refers to the partition, i.e.
sda1 = scsi type device (sd), first (a) drive, first partition (1)
sdb6 = scsi type device (sd), second (b) drive, sixth partition (6)
what error messages are you getting? can youp ost the results of 'cdrecord -scanbus' and 'rescan-scsi-bus.sh'?
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-GE-100FX 100BASE-FX SGMII SFP Transceiver Module
$83.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$23.99
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module
$6.80