Figured it out myself, thanks anyway
http://www.knoppix.net/forum/viewtopic.php?t=8943
I am trying to make a HD based system that boots from LILO. Not the Knoppix-installer install Knoppix type. The manual install that only takes up 750 meg on the drive. The method listed in the docs worked for 3.3 but 3.4 won't boot up. Some error about the boot image is protected.
On my spare computer I have a 2 gig hard drive. the first partition is 250 meg swap The second partition is the 800 meg for Knoppix. The third partition is a 350 meg encrypted home directory. The fourth partition around 600 meg is an unencrypted home directory.
Any ideas? could it have something to do with the isolinux syslinux switch on the new distro?
If it can boot from the CD there should be a way to get it to boot from the HD
Figured it out myself, thanks anyway
http://www.knoppix.net/forum/viewtopic.php?t=8943
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$226.00
Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM
$49.99
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Lenovo ThinkServer TS140 Xeon E3-1225v3 3.20GHz 16GB RAM Tower Server Needs HDD
$99.99
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
Gigabyte 2U Server 2x E5-2698 v3 128gb 12x 3.5 12G 9362-8i 14x Trays Rails
$394.99