Please post your /etc/lilo.conf
BTW, if you put Lilo on the Linux drive, don't you have to tell the bios to boot from that drive?
I am trying to do a knoppix hd install on an xp machine. I put in
a 2'nd hard drive so I could keep xp on its own disk. I formatted
the new drive as follows using cfdisk:
primary partition: 50 MB
logical: 3000MB
logical: 500MB
logical: 1000MB
I then did the knoppix install choosing to install lilo to partition instead
of master boot record. I created the boot disk. Rebooted computer
and when I select linux, or linux on hdb (i have 2 options for linux boot
on the menu - I assume they do the same thing) I get the following:
boot: Linux
Loading Linux
Error 0x07
Windows still boots ok with and without the boot disk.
Any help would be appreciated. I can cd to those directories on the
2'nd hard drive when I boot knoppix from the cd and it looks like
things were setup ok.
Brian
Please post your /etc/lilo.conf
BTW, if you put Lilo on the Linux drive, don't you have to tell the bios to boot from that drive?
I will have to wait until I get home to get the lilo.conf data.
I guess I was thinking if I am booting from the floppy I don't
have to tell the bios to boot from the hard drive - I thought that
was what the bootable floppy was for.
I do have one question - does the parition in which knoppix is
installed in have to be marked as bootable? I was thinking it
didn't if I was using the bootable floppy.
I did make one of the paritions on the 2'nd hard drive (where knoppix
is installed) bootable but there is nothing there currently - knoppix
was installed in the other partition.
Thanks for any info
Brian
Found the problem. I didn't realize this was really a lilo question.
Problem was new hard drive. Needed to turn on in bios. Thought
this was automagic since when I booted into windows (before
reformatting the drive) the drive showed up. :P
DELL PowerEdge R630 8SFF Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4xRJ45
$394.00
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$256.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$171.99
DELL PowerEdge R730 Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$247.00
Dell PowerEdge T430 Server w/ Intel Xeon E5-2650 V4 & 1100W PSU (2X) - NO RAM
$314.99
Dell PowerEdge R220 - Xeon E3-1220 v3 @3.10GHz | 8GB RAM | 500GB Storage
$50.00
DELL POWEREDGE R630 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$179.95
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$334.99
Dell Poweredge R730xd 2x E5-2660 v3 2.6ghz / 64gb / H730 / 24x Trays / 2x 750w
$344.99