-
Knoppix 3.4 ct kernel update
I made an hdd install from the 3.4 ct and everything works fine.
I installed it with 2.6.1 Kernel as described somewhere here in the forum.
After the installation i applied some patches from kano.
Everything worked fine again.
But when it comes to installing the newest nvidia drivers on kanos site i am stuck.
The scripts exits without installing the drivers and corrupts my XFree config.
Then i supposed that it might need the kernel sources.
When i tried to download the sources for my 2.6.1 i found that apt-get only offers me sources for 2.6.3.
So i tried to apply the Kernel update 2.6.3 for Kanotix but without success it seems cause uname -r still reports 2.6.1 .
How can i patch my kernel to 2.6.3?
Thx in advance
jollyagp
-
Same problem here and when i tried to install a new kernel show me this:
I did apt-get install kernel-source-2.6.4
ln -s /usr/src/kernel-source.... linux (i tried linux-2.6.1 too)
and when i try to do make menuconfig show that:
root@boxer:/usr/src/kernel-source-2.6.4# make menuconfig
HOSTCC scripts/fixdep
En el fichero incluído de /usr/include/sys/socket.h:35,
de /usr/include/netinet/in.h:24,
de scripts/fixdep.c:107:
/usr/include/bits/socket.h:305:24: asm/socket.h: No existe el fichero o el directorio (file dont exist)
make[1]: *** [scripts/fixdep] Error 1
make: *** [scripts/fixdep] Error 2
Anybody got a "howto" to get nvidia drivers work in knoppix 3.4 whit kernel 2.6.1 or how to upgrade the kernel? Could post a link here please?.
Thnx.
-
Senior Member
registered user
Originally Posted by
Malo
root@boxer:/usr/src/kernel-source-2.6.4# make menuconfig
HOSTCC scripts/fixdep
En el fichero incluído de /usr/include/sys/socket.h:35,
de /usr/include/netinet/in.h:24,
de scripts/fixdep.c:107:
/usr/include/bits/socket.h:305:24: asm/socket.h: No existe el fichero o el directorio (file dont exist)
make[1]: *** [scripts/fixdep] Error 1
make: *** [scripts/fixdep] Error 2
I believe Dave tracked that down to a problem with the linux-kernel-headers so apt-get --reinstall install linux-kernel-headers to reinstall and hopefully get setup right this time.
Anybody got a "howto" to get nvidia drivers work in knoppix 3.4 whit kernel 2.6.1 or how to upgrade the kernel? Could post a link here please?.
Thnx.
You need to use the 5336 version of the Nvidia installer or go to http://www.minion.de and get the required patches for a 2.6 kernel for versions older than that.
Similar Threads
-
By dingil in forum Customising & Remastering
Replies: 0
Last Post: 09-19-2004, 04:49 PM
-
By Bazou in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 05-14-2004, 09:12 AM
-
By lmsaga in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 04-25-2004, 12:29 PM
-
By WankelWannabe in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 02-10-2003, 03:50 PM
-
By my2cents in forum General Support
Replies: 2
Last Post: 01-28-2003, 11:32 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Samsung 16GB 2Rx4 PC4-2133P DDR4-17000 1.2V RDIMM ECC Registered Server Memory
$16.29
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Corsair Vengeance LPX 32GB PC4-25600 (DDR4-3200) Memory NEVER USED LOOSE STICKS
$40.00
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
A-Tech 16GB 2x 8GB PC3-12800 Desktop DDR3 1600 MHz 240pin DIMM Memory RAM 16G 8G
$27.98
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 64GB 4x 16GB 2Rx4 PC4-17000R DDR4 2133MHz ECC REG RDIMM Server Memory RAM
$87.96