-
Network card 3 COM 3C940 not detected
I have tried several times to use Knoppix (version 3.3 on a bootable CD), but my network card (3Com 3C940 Gigabit) is not detected by this operating system. Unfortunately, I am therefore not able to use Knoppix for the most important application I had in mind (recovery and transfer of data to another PC in case of emergencies). This network card came on board on my Asus P4C800 deluxe motherboard.
Help would be appreciated.
PS: I am an absolute beginner with Linux.
-
Hi, I was having the same problem as you, I'm also pretty new to Linux and Knoppix, but I have managed to rectify it.
I have a 3c2000 on board NIC, but the 3c940 and the 3c2000 share the same driver.
You can download the 3c940 driver from here: http://www.asus.it/support/download/...odelName=P4P8X
Once you have downloaded it you will have to build the driver module. Simply copy the 3c2000.tar.gz to the Knoppix desktop and extract it by right clicking it and then selecting 'extract' from the menu then open the folder it extracts to.
Next click tools then 'open terminal' The command window should open at the current directory where the driver is extracted.
Now type 'make install' and the driver should begin to build.
Once it has finished the driver module will be named 3c2000.o
The next step is to copy the driver module to a floppy disk.
Reboot knoppix with the floppy in the drive then at the boot prompt type 'Expert'
Follow the prompts until it asks if you want to load any other modules from a floppy.
Let it find the module then it will ask which modules you wish to install. Type 3c2000.o and then the driver should load and your card will be detected.
Then just continue with the prompts until knoppix has finished loading. You should now find the driver is loaded and you card is ready to use.
Let me know if you have any problems and if you get it working OK.
P.S. I'm typing this from Knoppix right now.
-
![Quote](images/misc/quote_icon.png)
Originally Posted by
ashyx
Hi, I was having the same problem as you, I'm also pretty new to Linux and Knoppix, but I have managed to rectify it.
I have a 3c2000 on board NIC, but the 3c940 and the 3c2000 share the same driver.
You can download the 3c940 driver from here:
http://www.asus.it/support/download/...odelName=P4P8X
Once you have downloaded it you will have to build the driver module. Simply copy the 3c2000.tar.gz to the Knoppix desktop and extract it by right clicking it and then selecting 'extract' from the menu then open the folder it extracts to.
Next click tools then 'open terminal' The command window should open at the current directory where the driver is extracted.
Now type 'make install' and the driver should begin to build.
Once it has finished the driver module will be named 3c2000.o
The next step is to copy the driver module to a floppy disk.
Reboot knoppix with the floppy in the drive then at the boot prompt type 'Expert'
Follow the prompts until it asks if you want to load any other modules from a floppy.
Let it find the module then it will ask which modules you wish to install. Type 3c2000.o and then the driver should load and your card will be detected.
Then just continue with the prompts until knoppix has finished loading. You should now find the driver is loaded and you card is ready to use.
Let me know if you have any problems and if you get it working OK.
P.S. I'm typing this from Knoppix right now.
I am most gratefull!!! I could not believe that I was able to get it working. I have been trying so long. I assumed that it would not be possible, because Knoppix starts from CD and in many occasions I get a message that information cannot be written because of inaccessibility (read-only etc). Also in this case I got error messages, but got the 3c2000.o anyhow.
Thanks tremendously for the clear description.
My next problem: although my soundcard (Sound Blaster live) is detected at startup and the driver emu10K1 is loaded, I cannot play wave- nor midi-files. Strangely enough, I can hear CD's (softer than usual) with the program KsCD, so that the system works alright in that case.
On my motherboard (Asus P4C800 deluxe) there is AI audio AC'97, but under Windows I am using the SoundBlaster, which is added to a PCI-slot. I have to check whether I have the on board chip disabled or on auto-detect. When I configure the audio under Knoppix, the AC97 is detected but does not play the Wave's and Midi's either. Possibly I need the new drivers on the Ausus-URL that you provided. But since the SBlive was detected during start-up and since the CD's are being played correctly, this might not be necessary.
Would you have any ideas on this one as well?
Thanks again for your help!
-
Can't help you with that one I'm afraid cuz I'm still pretty new to KNoppix, but learning fast. However someone will know the answer.
As for the write access to your disks. You can enable write access to ALL disks which will allow you to write to all windows partitions and Linux partions except NTFS.
Right click the drive on the desktop then click properties. Next select unmount then right click it again and click properties, this time click the 'DEVICE' tab and uncheck the 'Read only' box.
You should now be able to write to that drive.
-
Senior Member
registered user
![Quote](images/misc/quote_icon.png)
Originally Posted by
alfred
But since the SBlive was detected during start-up and since the CD's are being played correctly, this might not be necessary.
Would you have any ideas on this one as well?
Thanks again for your help!
Open a console window (clam shell icon on taskbar) and type in sudo /etc/init.d/alsa-autoconfig and see if it will setup alsa for you or you may want to try expert alsa when you boot and see if it will do it automatically. The CD will play because the is a direct connection to the sound card no OS involved other than for the player or if you use xmms to play it you do not need the cable connected at all it will do it digitally.
-
![Quote](images/misc/quote_icon.png)
Originally Posted by
Stephen
![Quote](images/misc/quote_icon.png)
Originally Posted by
alfred
But since the SBlive was detected during start-up and since the CD's are being played correctly, this might not be necessary.
Would you have any ideas on this one as well?
Thanks again for your help!
Open a console window (clam shell icon on taskbar) and type in
sudo /etc/init.d/alsa-autoconfig and see if it will setup alsa for you or you may want to try
expert alsa when you boot and see if it will do it automatically. The CD will play because the is a direct connection to the sound card no OS involved other than for the player or if you use xmms to play it you do not need the cable connected at all it will do it digitally.
Thanks for replying, Stephen. Your answer helped me to find a solution:
"Expert alsa" worked at boot-up. That is to say another sound driver was loaded. Trying to play a wave-file with this automatic driver, I got an error message. This made me to conclude that previously the correct driver might have been loaded. Trying to configure the soundcard, always the on board sound chip was detected and not my additional Soundblaster. After disabeling the on board chip (was previously at auto), my problems were solved and also Wave-files can be heard now!
-
icewm and KDE
I also posted this in the Networking forum
I swap between Windows 98 SE and Knoppix 3.3 a lot, cause I'm just learning *nix.
Using a 3C905B-TX Nic on a 633 Celeron e-machine w/256 MB RAM
I found if I boot to: "Knoppix desktop=icewm" first, logout/power down then boot with just "knoppix lang=us", I can get an IP address and surf teh net endlessly, but if I try to boot using KDE without the icewm step, my nic is reported as "not supported"
As Tarzan would say, "Me not know why"
Similar Threads
-
By erikr in forum Networking
Replies: 3
Last Post: 05-23-2005, 02:36 AM
-
By BlackmageIX in forum Networking
Replies: 1
Last Post: 07-24-2004, 11:57 PM
-
By kubikanber in forum Hardware & Booting
Replies: 1
Last Post: 05-21-2004, 04:10 PM
-
By dmk in forum Hardware & Booting
Replies: 0
Last Post: 05-13-2004, 09:40 AM
-
By _Iz- in forum Hardware & Booting
Replies: 9
Last Post: 01-07-2004, 12:24 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller picture](/store/img/g/ph8AAOSwnHxmXzcB/s-l225/Dell-EMC-092GD6-Broadcom-9305-16i-LSI-Quad-Port-4-.jpg)
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
![ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT picture](/store/img/g/m2IAAOSwmz5kyNFT/s-l225/ORICO-5-Bay-Raid-USB3-0-to-SATA-External-Hard-Driv.jpg)
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$134.39
![OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire picture](/store/img/g/-FoAAOSwtEBmQ5qa/s-l225/OWC-Guardian-Maximus-Raid-Enclosure-SATA-Hard-Driv.jpg)
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
![ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working picture](/store/img/g/fGwAAOSwAStmfi9c/s-l225/ASUS-Hyper-M-2-x16-Gen-4-RAID-Card-Used-Working.jpg)
ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working
$32.95
![Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile picture](/store/img/g/C7YAAOSwLYJl3nQQ/s-l225/Dell-PERC-H330-PCIe-3-0-x8-RAID-Storage-Controller.jpg)
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
![LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault picture](/store/img/g/NdcAAOSwlPtmc2X8/s-l225/LSI-MegaRAID-9361-8i-12Gbps-PCIe-3-x8-SATA-SAS-3-8.jpg)
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
![LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile picture](/store/img/g/3oUAAOSweflmcp0x/s-l225/LSI-8-Port-6Gbps-PCIe-3-0-External-SAS-RAID-Card-w.jpg)
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$29.00
![Dell H310 SATA SAS RAID Controller Card - HV52W with 1 SFF-8087 Cable, IT Mode picture](/store/img/g/9JUAAOSwlFNmcxPK/s-l225/Dell-H310-SATA-SAS-RAID-Controller-Card-HV52W-with.jpg)
Dell H310 SATA SAS RAID Controller Card - HV52W with 1 SFF-8087 Cable, IT Mode
$20.00
![ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB picture](/store/img/g/m2IAAOSwmz5kyNFT/s-l225/ORICO-5-Bay-Raid-Enclosure-USB3-0-SATA-External-Ha.jpg)
ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB
$42.49
![Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5](/store/img/g/izoAAOSwfCZlZs9y/s-l225/Yottamaster-5-Bay-RAID-Hard-Drive-Enclosure-Type-C.jpg)
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$139.99