Results 1 to 5 of 5

Thread: Cannot see FAT32 nor NTFS partitions (WinXp related?)

Hybrid View

  1. #1
    Junior Member
    Join Date
    Feb 2003
    Posts
    3

    Cannot see FAT32 nor NTFS partitions (WinXp related?)

    Please excuse my ignorance if this is a stupid question as i'm a linux newbie. I can successfully boot up and I'm using Konqueror to write this as I type. However I can't seem to mount my FAT32 partition (I also have an NTFS partition but that doesn't matter) on my laptop. There are 12 hda's listed and each one when I try to mount gives me /dev/hda_: Input/output error, mount:I could not determine filesystem type, and none was selected (where "_" is 1 thru 12). I thought Knoppix can automatically detect the partitions. Am I missing a step or does linux not like my partiticular config System configuration is Windows XP Pro with a c:NTFS and d:FAT32 partition. I was hopefully at minimum that I can use the Fat32 partition. Please advise. Thanks in advance!

    PS upon startup and when I try to mount any of the 12 hda's, there's a physical noise attributed to linux trying to determine the file system I suppose (hard drive almost grinding, hope that's normal)

  2. #2
    Junior Member
    Join Date
    Feb 2003
    Posts
    1

    mount ntfs

    Forgive me also for being a newbie...I am having the exact same problem..can someone help out there?

  3. #3
    Junior Member
    Join Date
    Feb 2003
    Posts
    3
    after further investigation, i found out that vfat is missing on my copy of knoppix... is this normal?

    modprobe vfat indicates that it's not loaded

    then I looked in the lib/module/linux-2...../fs and cannot see vfat listed,
    the other fs's seem to be there i.s. nfs, udp etc etc

    how come?? any linux expert out there can can shed some light? I then obtained a vfat.o from somewhere and i can't put it in the fs direct nor load it with modprobe for some reason... please help, tnx

  4. #4
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    You could try cat /proc/filesys* this is what it shows on my system.
    [03:32 AM Sun Feb 23: knoppix @ ~]$ cat /proc/filesys*
    nodev rootfs
    nodev bdev
    nodev proc
    nodev sockfs
    nodev tmpfs
    nodev shm
    nodev pipefs
    ext2
    nodev ramfs
    msdos
    vfat
    iso9660
    nodev devpts
    nodev usbdevfs
    nodev usbfs
    efs
    ext3
    nodev autofs
    Assuming you see the vfat in there you will have to edit as root in a console the /etc/fstab (vi /etc/fstab) and uncomment (remove the #)out the line #/dev/hda1 /mnt/hda1 auto noauto,user,exec 0 0 and change it to /dev/hda1 /mnt/hda1 vfat rw,auto,user,exec 0 0 this will mount the primary (bootable) partition on your HD just change the hda1 in both places in the line to whatever partition you would like to mount after you save the file you will have to re-boot and you should have read-write access.

    Hint when editing in vi use the insert key to add text when your done hit the esc key then
    shift : and you will see a : in the lower left type w then enter to write the file then shift : q enter to quit. You can also change the /mnt/hda1 portion of the line to a different one say /windows if you want you just have to cd / then enter while still in the console as root and type mkdir windows then enter when you have re-booted your /dev/hda1 will now be mounted /windows.

  5. #5
    Member registered user
    Join Date
    Jan 2003
    Location
    Northridge, California
    Posts
    48

    Possible Solution.

    I also heard you can't use hfs, mac partitions. I think a possible solution is that the /dev/hda1 is missing. Check with ls hda*. Then Try,

    MAKEDEV hda

    to fix.

Similar Threads

  1. Captive NTFS on Knoppix 3.6 and WInXP / NTFS hard drive
    By itaydagani in forum MS Windows & New to Linux
    Replies: 3
    Last Post: 02-02-2005, 12:53 AM
  2. unable to view/access my win98se(fat32) partitions
    By a2ilindia in forum Hdd Install / Debian / Apt
    Replies: 5
    Last Post: 07-21-2004, 02:13 AM
  3. FAT32 Partitions with Knoppix
    By John in Brisbane in forum General Support
    Replies: 5
    Last Post: 05-26-2004, 05:27 PM
  4. after knoppix hdinstall fat32 partitions not available
    By johnnylipps in forum Hdd Install / Debian / Apt
    Replies: 7
    Last Post: 10-15-2003, 03:18 AM
  5. i cann't access my fat32 and ntfs partitions from knoppix
    By Pex_boa in forum Hdd Install / Debian / Apt
    Replies: 7
    Last Post: 04-10-2003, 08:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Seagate 10TB 7200RPM 12Gbps 3.5in SAS Hard Drive ST10000NM096 picture

Seagate 10TB 7200RPM 12Gbps 3.5in SAS Hard Drive ST10000NM096

$79.99



Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5

Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive

$29.99



Dell ST2000NX0403 2T SATA 2.5 inch 7.2K CK3MN server hard drive picture

Dell ST2000NX0403 2T SATA 2.5 inch 7.2K CK3MN server hard drive

$45.00



HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5

HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD

$69.99



HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5

HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601

$89.99



Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5

Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive

$93.88



Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5

Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive

$99.99



SEAGATE ST4000NM0023 HARD DRIVE 3.5

SEAGATE ST4000NM0023 HARD DRIVE 3.5" SAS 4TB HDD

$16.99



Western Digital WD10JUCT 1TB 2.5

Western Digital WD10JUCT 1TB 2.5" SATA 3Gb/s 5400 RPM 16MB Laptop Hard Drive

$17.98



1TB HDD/SSD 2.5

1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed

$43.27