Results 1 to 7 of 7

Thread: SuSE escapee needs help!

  1. #1
    Senior Member registered user
    Join Date
    Feb 2003
    Posts
    929

    SuSE escapee needs help!

    I'm running the Debian created by using the install to hard drive script and Knoppix 3.1. Seems to have gone reasonably well except:

    Lilo. Simply didn't work. I'll try and podge together a lilo.conf on my SuSE drive: currently the only way I can get into Knoppix/Debian is through the SuSE install CD!

    Internet. kppp exits with "The pppd daemon died unexpectedly!
    Exit status: 4" which reads:

    "4 The kernel does not support PPP, for example, the PPP kernel
    driver is not included or cannot be loaded."

    Can this be right?

    I don't like kppp and would play with wvdial or kinternet (if I can find the source/ a Deb) but this looks very much like an error from pppd itself.

    Sound.I can't get any sound. I'm running a KT3 Via Ultra board with the AC97 on board sound. SuSE 8.0 (with an earlier kernel!) picks this up just fine and loads the via 8233 driver. The RedHat configuration tool won't allow me to load what looks like the appropriate module.

    Any ideas greatly appreciated. I want to be free of SuSE and learning the wonders of apt!



  2. #2
    Member registered user
    Join Date
    Feb 2003
    Posts
    43

    Re: SuSE escapee needs help!

    Quote Originally Posted by fingers99
    Internet. kppp exits with "The pppd daemon died unexpectedly!
    Exit status: 4" which reads:

    "4 The kernel does not support PPP, for example, the PPP kernel
    driver is not included or cannot be loaded."

    Can this be right?
    Yes. The kernel needs PPP support. Either insert the module using modprobe ("modprobe ppp") or rebuild the kernel with PPP and SLIP support either built-in or as modules.

    Any ideas greatly appreciated. I want to be free of SuSE and learning the wonders of apt!
    I started using SuSE instead of Red Hat - and I've not been disappointed at all. And of course, there's apt-rpm (NICE!). I use apt-rpm everywhere now. Now if I could just get my Knoppix HD install to use RPM....

  3. #3
    Junior Member
    Join Date
    Feb 2003
    Posts
    2
    install debian from woody unofficial netinst CD, copy knoppix over it.
    dominique

  4. #4
    Senior Member registered user
    Join Date
    Feb 2003
    Posts
    929
    Quote Originally Posted by niki2002
    install debian from woody unofficial netinst CD, copy knoppix over it.
    dominique
    Interesting, but sounds like an incredibly long winded way of doing things. I'm going Debian via Knoppix for now only because it looked (fna, fna) as though it'd be quicker than Gentoo (to install, that is).

  5. #5
    Senior Member registered user
    Join Date
    Feb 2003
    Posts
    929
    The kernel needs PPP support. Either insert the module using modprobe ("modprobe ppp") or rebuild the kernel with PPP and SLIP support either built-in or as modules.
    Yes, looks like I'm going to have to rebuild the kernel for sound anyway: there are no Debian modules for the via8233 and the 20 series kernel (which is pretty damn odd: what's the point of having a bleeding edge kernel with stone age sound drivers?). Such is life.



    I started using SuSE instead of Red Hat - and I've not been disappointed at all.
    I used to really rate SuSE until 8.0 came out and virtually nothing worked: no proper recognition for combo drives, Lilo instead of Grub, no script to set up ISA modems and the whole "we don't really care" attitude since they stopped being a privately owned firm. So, I thought, with this level of support I may as well go Debian or Gentoo.[/quote]

  6. #6
    Junior Member
    Join Date
    Feb 2003
    Posts
    8

    Knoppix from Suse

    Yes me too, changed from Suse 8, to Knoppix....was amazed at the live-cd and the way everything was recognised and set up within minutes. Tried the hd install, same result. Knoppix rocks. Finally something is here to wipe windows completely. GREAT.

  7. #7
    Junior Member
    Join Date
    Feb 2003
    Posts
    1

    PPP in your kernel

    If you are starting your Linux throw SuSE CD because your Lilo doesn't install then you probably don't have ppp support in your kernel because that.
    The kernel used to install or recover SuSE is not a full functional kernel. When you solve your lilo problem and boot using a regular (with modules) kernel build your ppp problem should be solved.

    I've been using SuSE since version 5.3 and I' m still using it and I like it.
    But now there's knoppix. The boot CD is the best tool I've ever had as a Network Administrator. It has a wonderfull selections of packages !!!
    Now I use SuSE 7.3 at my home desktop and knoppix 3.1 hd intalled at my laptop.

Similar Threads

  1. Replace Suse 9.2 Pro with Knoppix or other OS
    By heydude in forum MS Windows & New to Linux
    Replies: 1
    Last Post: 01-12-2005, 03:49 PM
  2. SuSe Pro 9.2 or Knoppix 3.7?
    By HewJass in forum MS Windows & New to Linux
    Replies: 3
    Last Post: 01-11-2005, 03:44 AM
  3. SuSE LiveCD 9.1
    By EmDee in forum The Lounge
    Replies: 6
    Last Post: 09-20-2004, 05:04 PM
  4. cloop on SuSE 8.2?
    By donnek in forum Customising & Remastering
    Replies: 2
    Last Post: 02-24-2004, 04:18 PM
  5. Replies: 1
    Last Post: 02-17-2004, 10:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 16GB RAM No HDD's picture

HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 16GB RAM No HDD's

$299.00



HP Proliant MicroServer Gen 8 2.3GHz CPU 16GB RAM NO DRIVES/CADDIES INCLUDED picture

HP Proliant MicroServer Gen 8 2.3GHz CPU 16GB RAM NO DRIVES/CADDIES INCLUDED

$179.99



HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ* picture

HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*

$94.99



HPE PROLIANT MICROSERVER GEN10 PLUS MICRO TOWER SERVER - USED picture

HPE PROLIANT MICROSERVER GEN10 PLUS MICRO TOWER SERVER - USED

$550.00



HPE ProLiant MicroServer Gen 10 Plus, Xeon E-2224, 16GB DDR4, 1TB M.2 NVMe SSD picture

HPE ProLiant MicroServer Gen 10 Plus, Xeon E-2224, 16GB DDR4, 1TB M.2 NVMe SSD

$750.00



HP ProLiant MicroServer Gen8 Server Intel Xeon E3-1220L v2 16GB DDR3 (4) 4TB HDs picture

HP ProLiant MicroServer Gen8 Server Intel Xeon E3-1220L v2 16GB DDR3 (4) 4TB HDs

$399.00



HP ProLiant Microserver Micro Server HSTNS-5151 untested picture

HP ProLiant Microserver Micro Server HSTNS-5151 untested

$75.00



ProLiant MicroServer Gen8 Intel Xeon E3-1220L V2 2.3GHz CPU 8GB RAM picture

ProLiant MicroServer Gen8 Intel Xeon E3-1220L V2 2.3GHz CPU 8GB RAM

$170.00



HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001 picture

HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001

$849.99



HPE microserver Gen8 Update Firmware iLO4 + BIOS System Latest HP Server FAST⚡️✅ picture

HPE microserver Gen8 Update Firmware iLO4 + BIOS System Latest HP Server FAST⚡️✅

$79.99