I ran knoppix (3.4) off the live cd and had set up my net connection with wvdial and it works great.
However, after installing to the harddrive via knx-hdinstall script... now I start the net using wvdial, and it connects per usual and the console outputs the same and assigns the connection a pid. It stays connected great, PPPstatus reports the connection working, sending a packet to keep it alive and recieving a response but when I attempt to use any internet based applications such as gaim or mozilla, nothing. It's as if it wasn't connected, although the connection is alive.
It works great if I run it off the CD though.
Anyone have any ideas? Is it possibly a configuartion I need to look into?
Thanks,
Louis
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
Dell PowerEdge RAID Controller HBA330 12Gbs PCIe 3.0 SAS SATA J7TNV Low Profile
$29.00
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99