I ran knoppix (3.4) off the live cd and had set up my net connection with wvdial and it works great.
However, after installing to the harddrive via knx-hdinstall script... now I start the net using wvdial, and it connects per usual and the console outputs the same and assigns the connection a pid. It stays connected great, PPPstatus reports the connection working, sending a packet to keep it alive and recieving a response but when I attempt to use any internet based applications such as gaim or mozilla, nothing. It's as if it wasn't connected, although the connection is alive.
It works great if I run it off the CD though.
Anyone have any ideas? Is it possibly a configuartion I need to look into?
Thanks,
Louis
Seagate Exos X16 ST14000NM001G 14TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$157.99
WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN
$49.99
Seagate Exos X22 ST20000NM004E 20TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$268.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$69.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$26.85
WD 4TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0040BBK-WESN
$69.99
WD HDD Ultrastar DC HC520 HUH721212AL4205 12TB 3.5" SAS Server Hard Disk Drive
$45.35