partitions don't mount

**jackren** · 03-20-2004, 03:13 PM

I made a change in fstab and changed it back (99% sure it's same as before)
and now when I start pc , only / is mounted at boot , so I can't get X running
i have also /usr , /home /MP3 , as seperate partitions.
Usb system also not working anymore.

Here is output of mount: when pc is started

/dev/hda1 on / type reiserfs (rw)
none on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
capifs on /dev/capi type capifs (rw,mode=0666)
automount(pid169

on /mnt/auto type autofs (rw,fd=5,pgrp=1698,minproto=2,maxproto=4)

and here is content of /etc/fstab :

# /etc/fstab: filesystem table.
#
# filesystem mountpoint type options dump pass
proc /proc proc defaults 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
/dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0
/dev/cdrom /cdrom iso9660 defaults,ro,user,noauto 0 0
/dev/cdburn /cdburn iso9660 defaults,ro,user,noauto 0 0
/dev/hda1 / reiserfs defaults 0 1
/dev/hda5 none swap sw 0 0
/dev/hda6 /home xfs auto,users,exec 0 0
/dev/hda7 /MP3 xfs auto,users,exec 0 0
/dev/hda8 /usr xfs auto,users,exec 0 0

/dev/hdd1 /win98 vfat noauto,users,exec,umask=000,uid=jack,gid=jack 0 0

Can anybody tell me why only / get mounted at boot time, or has any suggestions how to fix this?

**windos_no_thanks** · 03-20-2004, 07:31 PM

What do you get in /var/log/messages ?
What happens if you try to mount them by hand (as root) for instance:

Code:

mount /usr

BTW, you seem to be using reiserfs for root and xfs for the others, why ?
(that means you have to have both reiserfs and xfs support in the kernel, which makes it bigger)

**jackren** · 03-20-2004, 08:17 PM

I used mandrakelinux in the past and kept the partitions (xfs) from that time,
but since knoppix hd install freesez when trying to install on XFS partition, I changed root partition to reiserfs.

I can manualy mount the other partitions just fine, but as system has already started up, a lot of apps don't run ok now ( capisuite, usb system etc..)

Here's relavant meassages of : /var/log/messages : ( a lot! )

Mar 20 13:19:55 jackbox1 syslogd 1.4.1#10: restart.
Mar 20 13:19:55 jackbox1 kernel: klogd 1.4.1#10, log source = /proc/kmsg started.
Mar 20 13:19:55 jackbox1 kernel: Inspecting /boot/System.map-2.4.22test6
Mar 20 13:19:56 jackbox1 kernel: Loaded 23297 symbols from /boot/System.map-2.4.22test6.
Mar 20 13:19:56 jackbox1 kernel: Symbols match kernel version 2.4.22.
Mar 20 13:19:56 jackbox1 kernel: Loaded 23 symbols from 3 modules.
Mar 20 13:19:56 jackbox1 kernel: Linux version 2.4.22test6 (root@jackbox1) (gcc versie 3.2.3 (Debian)) #7 SMP zo dec 21 15:30:00 CET 2003
Mar 20 13:19:56 jackbox1 kernel: BIOS-provided physical RAM map:
Mar 20 13:19:56 jackbox1 kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 20 13:19:56 jackbox1 kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 20 13:19:56 jackbox1 kernel: BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved)
Mar 20 13:19:56 jackbox1 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 20 13:19:56 jackbox1 kernel: BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
Mar 20 13:19:56 jackbox1 kernel: BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
Mar 20 13:19:56 jackbox1 kernel: BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
Mar 20 13:19:56 jackbox1 kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Mar 20 13:19:56 jackbox1 kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Mar 20 13:19:56 jackbox1 kernel: BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
Mar 20 13:19:56 jackbox1 kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Mar 20 13:19:56 jackbox1 kernel: 0MB HIGHMEM available.
Mar 20 13:19:56 jackbox1 kernel: 255MB LOWMEM available.
Mar 20 13:19:56 jackbox1 kernel: found SMP MP-table at 000fbb20
Mar 20 13:19:56 jackbox1 kernel: hm, page 000fb000 reserved twice.
Mar 20 13:19:56 jackbox1 kernel: hm, page 000fc000 reserved twice.
Mar 20 13:19:56 jackbox1 kernel: hm, page 000f6000 reserved twice.
Mar 20 13:19:56 jackbox1 kernel: hm, page 000f7000 reserved twice.
Mar 20 13:19:56 jackbox1 kernel: On node 0 totalpages: 65520
Mar 20 13:19:56 jackbox1 kernel: zone(0): 4096 pages.
Mar 20 13:19:56 jackbox1 kernel: zone(1): 61424 pages.
Mar 20 13:19:56 jackbox1 kernel: zone(2): 0 pages.
Mar 20 13:19:56 jackbox1 kernel: ACPI: RSDP (v000 AMI ) @ 0x000fa340
Mar 20 13:19:56 jackbox1 kernel: ACPI: RSDT (v001 AMIINT INTEL845 0x00000010 MSFT 0x00000097) @ 0x0fff0000
Mar 20 13:19:56 jackbox1 kernel: ACPI: FADT (v001 AMIINT INTEL845 0x00000011 MSFT 0x00000097) @ 0x0fff0030
Mar 20 13:19:56 jackbox1 kernel: ACPI: MADT (v001 AMIINT INTEL845 0x00000009 MSFT 0x00000097) @ 0x0fff00c0
Mar 20 13:19:56 jackbox1 kernel: ACPI: DSDT (v001 INTEL P4I45D 0x00001000 MSFT 0x0100000d) @ 0x00000000
Mar 20 13:19:56 jackbox1 kernel: ACPI: Local APIC address 0xfee00000
Mar 20 13:19:56 jackbox1 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar 20 13:19:56 jackbox1 kernel: Processor #0 Pentium 4(tm) XEON(tm) APIC version 16
Mar 20 13:19:56 jackbox1 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
Mar 20 13:19:56 jackbox1 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
Mar 20 13:19:56 jackbox1 kernel: IOAPIC[0]: Assigned apic_id 2
Mar 20 13:19:56 jackbox1 kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23
Mar 20 13:19:56 jackbox1 kernel: ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
Mar 20 13:19:56 jackbox1 kernel: ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
Mar 20 13:19:56 jackbox1 kernel: Using ACPI (MADT) for SMP configuration information
Mar 20 13:19:56 jackbox1 kernel: Kernel command line: BOOT_IMAGE=test6 ro root=301 hdc=ide-scsi hde=ide-scsi devfs=nomount apm=on
Mar 20 13:19:56 jackbox1 kernel: ide_setup: hdc=ide-scsi
Mar 20 13:19:56 jackbox1 kernel: ide_setup: hde=ide-scsi
Mar 20 13:19:56 jackbox1 kernel: Initializing CPU#0
Mar 20 13:19:56 jackbox1 kernel: Detected 2410.572 MHz processor.
Mar 20 13:19:56 jackbox1 kernel: Console: colour VGA+ 80x25
Mar 20 13:19:56 jackbox1 kernel: Calibrating delay loop... 4810.34 BogoMIPS
Mar 20 13:19:56 jackbox1 kernel: Memory: 254716k/262080k available (2484k kernel code, 6976k reserved, 643k data, 160k init, 0k highmem)
Mar 20 13:19:56 jackbox1 kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Mar 20 13:19:56 jackbox1 kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mar 20 13:19:56 jackbox1 kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Mar 20 13:19:56 jackbox1 kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Mar 20 13:19:56 jackbox1 kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 20 13:19:56 jackbox1 kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Mar 20 13:19:56 jackbox1 kernel: CPU: L2 cache: 512K
Mar 20 13:19:56 jackbox1 kernel: CPU: Hyper-Threading is disabled
Mar 20 13:19:56 jackbox1 kernel: Intel machine check architecture supported.
Mar 20 13:19:56 jackbox1 kernel: Intel machine check reporting enabled on CPU#0.
Mar 20 13:19:56 jackbox1 kernel: Enabling fast FPU save and restore... done.
Mar 20 13:19:56 jackbox1 kernel: Enabling unmasked SIMD FPU exception support... done.
Mar 20 13:19:56 jackbox1 kernel: Checking 'hlt' instruction... OK.
Mar 20 13:19:56 jackbox1 kernel: POSIX conformance testing by UNIFIX
Mar 20 13:19:56 jackbox1 kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Mar 20 13:19:56 jackbox1 kernel: mtrr: detected mtrr type: Intel
Mar 20 13:19:56 jackbox1 kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Mar 20 13:19:56 jackbox1 kernel: CPU: L2 cache: 512K
Mar 20 13:19:56 jackbox1 kernel: CPU: Hyper-Threading is disabled
Mar 20 13:19:56 jackbox1 kernel: Intel machine check reporting enabled on CPU#0.
Mar 20 13:19:56 jackbox1 kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Mar 20 13:19:56 jackbox1 kernel: per-CPU timeslice cutoff: 1463.15 usecs.
Mar 20 13:19:56 jackbox1 kernel: enabled ExtINT on CPU#0
Mar 20 13:19:56 jackbox1 kernel: ESR value before enabling vector: 00000000
Mar 20 13:19:56 jackbox1 kernel: ESR value after enabling vector: 00000000
Mar 20 13:19:56 jackbox1 kernel: ENABLING IO-APIC IRQs
Mar 20 13:19:56 jackbox1 kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Mar 20 13:19:56 jackbox1 kernel: testing the IO APIC.......................
Mar 20 13:19:56 jackbox1 kernel:
Mar 20 13:19:56 jackbox1 kernel: .................................... done.
Mar 20 13:19:56 jackbox1 kernel: Using local APIC timer interrupts.
Mar 20 13:19:56 jackbox1 kernel: calibrating APIC timer ...
Mar 20 13:19:56 jackbox1 kernel: ..... CPU clock speed is 2410.5991 MHz.
Mar 20 13:19:56 jackbox1 kernel: ..... host bus clock speed is 133.9220 MHz.
Mar 20 13:19:56 jackbox1 kernel: cpu: 0, clocks: 1339220, slice: 669610
Mar 20 13:19:56 jackbox1 kernel: CPU0<T0:1339216,T1:669600,D:6,S:669610,C:1339220>
Mar 20 13:19:56 jackbox1 kernel: Waiting on wait_init_idle (map = 0x0)
Mar 20 13:19:56 jackbox1 kernel: All processors have done init_idle
Mar 20 13:19:56 jackbox1 kernel: ACPI: Subsystem revision 20030813
Mar 20 13:19:56 jackbox1 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=3
Mar 20 13:19:56 jackbox1 kernel: PCI: Using configuration type 1
Mar 20 13:19:56 jackbox1 kernel: ACPI: Interpreter enabled
Mar 20 13:19:56 jackbox1 kernel: ACPI: Using IOAPIC for interrupt routing
Mar 20 13:19:56 jackbox1 kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5)
Mar 20 13:19:56 jackbox1 kernel: ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.MDET] (Node c133f300), AE_AML_REGION_LIMIT
Mar 20 13:19:56 jackbox1 kernel: ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node c133f480), AE_AML_REGION_LIMIT
Mar 20 13:19:56 jackbox1 kernel: ACPI-0098: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node c133f480), AE_AML_REGION_LIMIT
Mar 20 13:19:56 jackbox1 kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Mar 20 13:19:56 jackbox1 kernel: PCI: Probing PCI hardware (bus 00)
Mar 20 13:19:56 jackbox1 kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
Mar 20 13:19:56 jackbox1 kernel: ACPI: Power Resource [URP1] (off)
Mar 20 13:19:56 jackbox1 kernel: ACPI: Power Resource [URP2] (off)
Mar 20 13:19:56 jackbox1 kernel: ACPI: Power Resource [FDDP] (off)
Mar 20 13:19:56 jackbox1 kernel: ACPI: Power Resource [LPTP] (off)
Mar 20 13:19:56 jackbox1 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Mar 20 13:19:56 jackbox1 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Mar 20 13:19:56 jackbox1 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
Mar 20 13:19:56 jackbox1 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Mar 20 13:19:56 jackbox1 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Mar 20 13:19:56 jackbox1 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
Mar 20 13:19:56 jackbox1 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Mar 20 13:19:56 jackbox1 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Mar 20 13:19:56 jackbox1 kernel: PCI: Probing PCI hardware
Mar 20 13:19:56 jackbox1 kernel: PCI: Using ACPI for IRQ routing
Mar 20 13:19:56 jackbox1 kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Mar 20 13:19:56 jackbox1 kernel: PCI: Via IRQ fixup for 03:0b.1, from 11 to 7
Mar 20 13:19:56 jackbox1 kernel: PCI: Via IRQ fixup for 03:0b.0, from 11 to 6
Mar 20 13:19:56 jackbox1 kernel: isapnp: Scanning for PnP cards...
Mar 20 13:19:56 jackbox1 kernel: isapnp: No Plug & Play device found
Mar 20 13:19:56 jackbox1 kernel: Linux NET4.0 for Linux 2.4
Mar 20 13:19:56 jackbox1 kernel: Based upon Swansea University Computer Society NET3.039
Mar 20 13:19:56 jackbox1 kernel: Initializing RT netlink socket
Mar 20 13:19:56 jackbox1 kernel: Starting kswapd
Mar 20 13:19:56 jackbox1 kernel: VFS: Disk quotas vdquot_6.5.1
Mar 20 13:19:56 jackbox1 kernel: Journalled Block Device driver loaded
Mar 20 13:19:56 jackbox1 kernel: SGI XFS snapshot-2.4.22-2003-11-10_23:49_UTC with ACLs, realtime, no debug enabled
Mar 20 13:19:56 jackbox1 kernel: SGI XFS Quota Management subsystem
Mar 20 13:19:56 jackbox1 kernel: pty: 256 Unix98 ptys configured
Mar 20 13:19:56 jackbox1 kernel: Floppy drive(s): fd0 is 1.44M
Mar 20 13:19:56 jackbox1 kernel: FDC 0 is a post-1991 82077
Mar 20 13:19:56 jackbox1 kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Mar 20 13:19:56 jackbox1 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Mar 20 13:19:56 jackbox1 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 20 13:19:56 jackbox1 kernel: ICH2: IDE controller at PCI slot 00:1f.1
Mar 20 13:19:56 jackbox1 kernel: ICH2: chipset revision 5
Mar 20 13:19:56 jackbox1 kernel: ICH2: not 100%% native mode: will probe irqs later
Mar 20 13:19:56 jackbox1 kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda

MA, hdb

io
Mar 20 13:19:56 jackbox1 kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc

MA, hdd

MA
Mar 20 13:19:56 jackbox1 kernel: SiI680: IDE controller at PCI slot 03:07.0
Mar 20 13:19:56 jackbox1 kernel: SiI680: chipset revision 1
Mar 20 13:19:56 jackbox1 kernel: SiI680: not 100%% native mode: will probe irqs later
Mar 20 13:19:56 jackbox1 kernel: SiI680: BASE CLOCK == 133
Mar 20 13:19:56 jackbox1 kernel: ide2: MMIO-DMA , BIOS settings: hde

io, hdf

io
Mar 20 13:19:56 jackbox1 kernel: ide3: MMIO-DMA , BIOS settings: hdg

io, hdh

io
Mar 20 13:19:56 jackbox1 kernel: hda: Maxtor 4D040H2, ATA DISK drive
Mar 20 13:19:56 jackbox1 kernel: hdc: LTN526S, ATAPI CD/DVD-ROM drive
Mar 20 13:19:56 jackbox1 kernel: hdd: ST33210A, ATA DISK drive
Mar 20 13:19:56 jackbox1 kernel: hde: Hewlett-Packard CD-Writer Plus 9100, ATAPI CD/DVD-ROM drive
Mar 20 13:19:56 jackbox1 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 20 13:19:56 jackbox1 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar 20 13:19:56 jackbox1 kernel: ide2 at 0xd0807f80-0xd0807f87,0xd0807f8a on irq 16
Mar 20 13:19:56 jackbox1 kernel: hda: attached ide-disk driver.
Mar 20 13:19:56 jackbox1 kernel: hda: host protected area => 1
Mar 20 13:19:56 jackbox1 kernel: hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=4982/255/63
Mar 20 13:19:56 jackbox1 kernel: hdd: attached ide-disk driver.
Mar 20 13:19:56 jackbox1 kernel: hdd: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 20 13:19:56 jackbox1 kernel: hdd: task_no_data_intr: error=0x04 { DriveStatusError }
Mar 20 13:19:56 jackbox1 kernel: hdd: 6346368 sectors (3249 MB) w/256KiB Cache, CHS=6296/16/63
Mar 20 13:19:56 jackbox1 kernel: hdc: attached ide-scsi driver.
Mar 20 13:19:56 jackbox1 kernel: hde: attached ide-scsi driver.
Mar 20 13:19:56 jackbox1 kernel: Partition check:
Mar 20 13:19:56 jackbox1 kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
Mar 20 13:19:56 jackbox1 kernel: hdd: [PTBL] [787/128/63] hdd1
Mar 20 13:19:56 jackbox1 kernel: Highpoint HPT370 Softwareraid driver for linux version 0.02
Mar 20 13:19:56 jackbox1 kernel: Guestimating sector 80037343 for superblock
Mar 20 13:19:56 jackbox1 kernel: Guestimating sector 6345343 for superblock
Mar 20 13:19:56 jackbox1 kernel: SCSI subsystem driver Revision: 1.00
Mar 20 13:19:56 jackbox1 kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Mar 20 13:19:56 jackbox1 kernel: Vendor: LITEON Model: CD-ROM LTN526S Rev: YS0J
Mar 20 13:19:56 jackbox1 kernel: Type: CD-ROM ANSI SCSI revision: 02
Mar 20 13:19:56 jackbox1 kernel: Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0c
Mar 20 13:19:56 jackbox1 kernel: Type: CD-ROM ANSI SCSI revision: 02
Mar 20 13:19:56 jackbox1 kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Mar 20 13:19:56 jackbox1 kernel: Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
Mar 20 13:19:56 jackbox1 kernel: sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
Mar 20 13:19:56 jackbox1 kernel: Uniform CD-ROM driver Revision: 3.12
Mar 20 13:19:56 jackbox1 kernel: sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Mar 20 13:19:56 jackbox1 kernel: usb.c: registered new driver usbdevfs
Mar 20 13:19:56 jackbox1 kernel: usb.c: registered new driver hub
Mar 20 13:19:56 jackbox1 kernel: ehci_hcd 03:0b.2: VIA Technologies, Inc. USB 2.0
Mar 20 13:19:56 jackbox1 kernel: ehci_hcd 03:0b.2: irq 20, pci mem d0818d00
Mar 20 13:19:56 jackbox1 kernel: usb.c: new USB bus registered, assigned bus number 1
Mar 20 13:19:56 jackbox1 kernel: PCI: 03:0b.2 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
Mar 20 13:19:56 jackbox1 kernel: PCI: 03:0b.2 PCI cache line size corrected to 128.
Mar 20 13:19:56 jackbox1 kernel: ehci_hcd 03:0b.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-19/2.4
Mar 20 13:19:56 jackbox1 kernel: hub.c: USB hub found
Mar 20 13:19:56 jackbox1 kernel: hub.c: 4 ports detected
Mar 20 13:19:56 jackbox1 kernel: usb.c: registered new driver usbscanner
Mar 20 13:19:56 jackbox1 kernel: scanner.c: 0.4.13:USB Scanner Driver
Mar 20 13:19:56 jackbox1 kernel: usb.c: registered new driver usblp
Mar 20 13:19:56 jackbox1 kernel: printer.c: v0.11: USB Printer Device Class driver
Mar 20 13:19:56 jackbox1 kernel: Initializing Cryptographic API
Mar 20 13:19:56 jackbox1 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Mar 20 13:19:56 jackbox1 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Mar 20 13:19:56 jackbox1 kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Mar 20 13:19:56 jackbox1 kernel: TCP: Hash tables configured (established 16384 bind 16384)
Mar 20 13:19:56 jackbox1 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Mar 20 13:19:56 jackbox1 kernel: FAT: bogus logical sector size 0
Mar 20 13:19:56 jackbox1 kernel: reiserfs: found format "3.6" with standard journal
Mar 20 13:19:56 jackbox1 kernel: reiserfs: checking transaction log (device ide0(3,1)) ...
Mar 20 13:19:56 jackbox1 kernel: for (ide0(3,1))
Mar 20 13:19:56 jackbox1 kernel: reiserfs: replayed 28 transactions in 1 seconds
Mar 20 13:19:56 jackbox1 kernel: ide0(3,1):Using r5 hash to sort names
Mar 20 13:19:56 jackbox1 kernel: VFS: Mounted root (reiserfs filesystem) readonly.
Mar 20 13:19:56 jackbox1 kernel: Freeing unused kernel memory: 160k freed
Mar 20 13:19:56 jackbox1 kernel: Adding Swap: 665240k swap-space (priority -1)
Mar 20 13:19:56 jackbox1 kernel: Serial driver version 5.05c (2001-07-0

with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
Mar 20 13:19:56 jackbox1 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Mar 20 13:19:56 jackbox1 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Mar 20 13:19:56 jackbox1 kernel: Real Time Clock Driver v1.10e
Mar 20 13:19:56 jackbox1 kernel: blk: queue c049a300, I/O limit 4095Mb (mask 0xffffffff)
Mar 20 13:19:56 jackbox1 kernel: blk: queue c049a8b4, I/O limit 4095Mb (mask 0xffffffff)
Mar 20 13:19:56 jackbox1 kernel: blk: queue c049a300, I/O limit 4095Mb (mask 0xffffffff)
Mar 20 13:19:56 jackbox1 kernel: CAPI-driver Rev 1.1.4.1: loaded
Mar 20 13:19:56 jackbox1 kernel: capifs: Rev 1.1.4.1
Mar 20 13:19:56 jackbox1 kernel: capi20: started up with major 68
Mar 20 13:19:56 jackbox1 kernel: kcapi: capi20 attached
Mar 20 13:19:56 jackbox1 kernel: capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs)
Mar 20 13:19:56 jackbox1 kernel: fcpci: AVM FRITZ!Card PCI driver, revision 0.2
Mar 20 13:19:56 jackbox1 kernel: fcpci: (fcpci built on Jan 16 2004 at 21:47:55)
Mar 20 13:19:56 jackbox1 kernel: fcpci: Loading...
Mar 20 13:19:56 jackbox1 kernel: fcpci: Driver 'fcpci' attached to stack
Mar 20 13:19:56 jackbox1 kernel: kcapi: driver fcpci attached
Mar 20 13:19:56 jackbox1 kernel: fcpci: Auto-attaching...
Mar 20 13:19:56 jackbox1 kernel: fcpci: Stack version 3.09-10
Mar 20 13:19:56 jackbox1 kernel: kcapi: Controller 1: fritz-pci attached
Mar 20 13:19:56 jackbox1 kernel: kcapi: card 1 "fritz-pci" ready.
Mar 20 13:19:56 jackbox1 kernel: fcpci: Loaded.
Mar 20 13:19:56 jackbox1 kernel: kcapi: notify up contr 1
Mar 20 13:19:56 jackbox1 kernel: capi: controller 1 up
Mar 20 13:20:00 jackbox1 kernel: blk: queue c049a8b4, I/O limit 4095Mb (mask 0xffffffff)
Mar 20 13:20:00 jackbox1 kernel: blk: queue c049a300, I/O limit 4095Mb (mask 0xffffffff)
Mar 20 13:20:00 jackbox1 kernel: hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 20 13:20:00 jackbox1 kernel:
Mar 20 13:20:00 jackbox1 kernel: hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 20 13:20:00 jackbox1 kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 20 13:20:00 jackbox1 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Mar 20 13:20:00 jackbox1 kernel: hda: CHECK for good STATUS
Mar 20 13:20:06 jackbox1 kernel: apm: BIOS not found.
Mar 20 13:20:06 jackbox1 kernel: usb.c: registered new driver hiddev
Mar 20 13:20:06 jackbox1 kernel: usb.c: registered new driver hid
Mar 20 13:20:06 jackbox1 kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Mar 20 13:20:06 jackbox1 kernel: hid-core.c: USB HID support drivers
Mar 20 13:20:06 jackbox1 kernel: usb-uhci.c: $Revision: 1.275 $ time 15:54:14 Dec 21 2003
Mar 20 13:20:06 jackbox1 kernel: usb-uhci.c: High bandwidth mode enabled
Mar 20 13:20:06 jackbox1 kernel: usb-uhci.c: USB UHCI at I/O 0xec00, IRQ 19
Mar 20 13:20:06 jackbox1 kernel: usb-uhci.c: Detected 2 ports
Mar 20 13:20:06 jackbox1 kernel: usb.c: new USB bus registered, assigned bus number 2
Mar 20 13:20:06 jackbox1 kernel: hub.c: USB hub found
Mar 20 13:20:06 jackbox1 kernel: hub.c: 2 ports detected
Mar 20 13:20:06 jackbox1 kernel: usb-uhci.c: USB UHCI at I/O 0xbc00, IRQ 23
Mar 20 13:20:06 jackbox1 kernel: usb-uhci.c: Detected 2 ports
Mar 20 13:20:06 jackbox1 kernel: usb.c: new USB bus registered, assigned bus number 3
Mar 20 13:20:06 jackbox1 kernel: hub.c: USB hub found
Mar 20 13:20:06 jackbox1 kernel: hub.c: 2 ports detected
Mar 20 13:20:06 jackbox1 kernel: usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 22
Mar 20 13:20:06 jackbox1 kernel: usb-uhci.c: Detected 2 ports
Mar 20 13:20:06 jackbox1 kernel: usb.c: new USB bus registered, assigned bus number 4
Mar 20 13:20:06 jackbox1 kernel: hub.c: USB hub found
Mar 20 13:20:06 jackbox1 kernel: hub.c: 2 ports detected
Mar 20 13:20:06 jackbox1 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Mar 20 13:20:07 jackbox1 kernel: CSLIP: code copyright 1989 Regents of the University of California
Mar 20 13:20:07 jackbox1 kernel: ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded
Mar 20 13:20:07 jackbox1 kernel: HiSax: Linux Driver for passive ISDN cards
Mar 20 13:20:07 jackbox1 kernel: HiSax: Version 3.5 (module)
Mar 20 13:20:07 jackbox1 kernel: HiSax: Layer1 Revision 1.1.4.1
Mar 20 13:20:07 jackbox1 kernel: HiSax: Layer2 Revision 1.1.4.1
Mar 20 13:20:07 jackbox1 kernel: HiSax: TeiMgr Revision 1.1.4.1
Mar 20 13:20:07 jackbox1 kernel: HiSax: Layer3 Revision 1.1.4.1
Mar 20 13:20:07 jackbox1 kernel: HiSax: LinkLayer Revision 1.1.4.1
Mar 20 13:20:07 jackbox1 kernel: hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0
Mar 20 13:20:07 jackbox1 kernel: hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1
Mar 20 13:20:07 jackbox1 kernel: HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 (0)
Mar 20 13:20:07 jackbox1 kernel: HiSax: DSS1 Rev. 1.1.4.1
Mar 20 13:20:07 jackbox1 kernel: HiSax: 2 channels added
Mar 20 13:20:07 jackbox1 kernel: HiSax: MAX_WAITING_CALLS added
Mar 20 13:20:07 jackbox1 kernel: hisax_fcpcipnp: found adapter Fritz!Card PCI v2 at 03:04.0
Mar 20 13:20:07 jackbox1 kernel: HiSax module removed
Mar 20 13:20:07 jackbox1 kernel: ISDN-subsystem unloaded
Mar 20 13:20:07 jackbox1 kernel: gameport0: Emu10k1 Gameport at 0xdc00 size 8 speed 994 kHz
Mar 20 13:20:07 jackbox1 kernel: 8139too Fast Ethernet driver 0.9.26
Mar 20 13:20:07 jackbox1 kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Mar 20 13:20:07 jackbox1 kernel: agpgart: Maximum main memory to use for agp memory: 203M
Mar 20 13:20:07 jackbox1 kernel: agpgart: Detected Intel i845 chipset
Mar 20 13:20:07 jackbox1 kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Mar 20 13:20:07 jackbox1 kernel: NTFS driver v1.1.22 [Flags: R/W MODULE]
Mar 20 13:20:07 jackbox1 kernel: hub.c: new USB device 00:1f.2-1, assigned address 2
Mar 20 13:20:07 jackbox1 kernel: CSLIP: code copyright 1989 Regents of the University of California
Mar 20 13:20:07 jackbox1 kernel: ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded
Mar 20 13:20:07 jackbox1 kernel: kcapi: capidrv attached
Mar 20 13:20:07 jackbox1 kernel: kcapi: appl 1 up
Mar 20 13:20:07 jackbox1 kernel: capidrv-1: now up (2 B channels)
Mar 20 13:20:07 jackbox1 kernel: capidrv-1: D2 trace enabled
Mar 20 13:20:07 jackbox1 kernel: capidrv: Rev 1.1.4.1: loaded
Mar 20 13:20:07 jackbox1 kernel: b1: revision 1.1.4.1
Mar 20 13:20:07 jackbox1 kernel: b1dma: revision 1.1.4.1
Mar 20 13:20:07 jackbox1 kernel: dss1_divert module successfully installed
Mar 20 13:20:07 jackbox1 kernel: PPP BSD Compression module registered
Mar 20 13:20:07 jackbox1 kernel: HiSax: Linux Driver for passive ISDN cards
Mar 20 13:20:07 jackbox1 kernel: HiSax: Version 3.5 (module)
Mar 20 13:20:07 jackbox1 kernel: HiSax: Layer1 Revision 1.1.4.1
Mar 20 13:20:07 jackbox1 kernel: HiSax: Layer2 Revision 1.1.4.1
Mar 20 13:20:07 jackbox1 kernel: HiSax: TeiMgr Revision 1.1.4.1
Mar 20 13:20:07 jackbox1 kernel: HiSax: Layer3 Revision 1.1.4.1
Mar 20 13:20:07 jackbox1 kernel: HiSax: LinkLayer Revision 1.1.4.1
Mar 20 13:20:07 jackbox1 kernel: sisfb: Video ROM found and mapped to c00c0000
Mar 20 13:20:07 jackbox1 kernel: sisfb: Framebuffer at 0xc0000000, mapped to 0xd0b94000, size 65536k
Mar 20 13:20:07 jackbox1 kernel: sisfb: MMIO at 0xdfcc0000, mapped to 0xd4b95000, size 256k
Mar 20 13:20:07 jackbox1 kernel: sisfb: Memory heap starting at 64512K
Mar 20 13:20:07 jackbox1 kernel: sisfb: Using MMIO queue mode
Mar 20 13:20:07 jackbox1 kernel: Creative EMU10K1 PCI Audio Driver, version 0.20, 15:53:26 Dec 21 2003
Mar 20 13:20:07 jackbox1 kernel: emu10k1: EMU10K1 rev 7 model 0x8023 found, IO at 0xc000-0xc01f, IRQ 19
Mar 20 13:20:07 jackbox1 kernel: ac97_codec: AC97 codec, id: TRA35 (TriTech TR A5)
Mar 20 13:20:07 jackbox1 kernel: hub.c: new USB device 00:1f.2-1, assigned address 3
Mar 20 13:20:07 jackbox1 kernel: usb.c: registered new driver midi
Mar 20 13:20:07 jackbox1 kernel: hpusbscsi.c: [hpusbscsi_init:250] driver loaded, DebugLvel=0
Mar 20 13:20:07 jackbox1 kernel: usb.c: registered new driver hpusbscsi
Mar 20 13:20:07 jackbox1 kernel: usb.c: registered new driver usblcd
Mar 20 13:20:07 jackbox1 kernel: usblcd.c: USBLCD Driver Version 1.03 (C) Adams IT Services http://www.usblcd.de
Mar 20 13:20:07 jackbox1 kernel: usblcd.c: USBLCD support registered.
Mar 20 13:20:07 jackbox1 kernel: Initializing USB Mass Storage driver...
Mar 20 13:20:07 jackbox1 kernel: usb.c: registered new driver usb-storage
Mar 20 13:20:07 jackbox1 kernel: USB Mass Storage support registered.
Mar 20 13:20:07 jackbox1 kernel: usb.c: registered new driver serial
Mar 20 13:20:07 jackbox1 kernel: usbserial.c: USB Serial support registered for Generic
Mar 20 13:20:07 jackbox1 kernel: usbserial.c: USB Serial Driver core v1.4
Mar 20 13:20:07 jackbox1 kernel: usb.c: registered new driver audio
Mar 20 13:20:07 jackbox1 kernel: audio.c: v1.0.0:USB Audio Class driver
Mar 20 13:20:07 jackbox1 kernel: usb.c: registered new driver dabusb
Mar 20 13:20:07 jackbox1 kernel: dabusb.c: v1.54

AB-USB Interface Driver for Linux (c)1999
Mar 20 13:20:07 jackbox1 kernel: usb.c: registered new driver microtekX6
Mar 20 13:20:07 jackbox1 kernel: microtek.c: v0.4.4:Microtek Scanmaker X6 USB scanner driver
Mar 20 13:20:07 jackbox1 kernel: usb.c: registered new driver powermate
Mar 20 13:20:07 jackbox1 kernel: usb.c: registered new driver speedtch
Mar 20 13:20:07 jackbox1 kernel: usb.c: registered new driver tiglusb
Mar 20 13:20:07 jackbox1 kernel: tiglusb.c: TI-GRAPH LINK USB (aka SilverLink) driver, version 1.06
Mar 20 13:20:07 jackbox1 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 20 13:20:08 jackbox1 kernel: hub.c: new USB device 00:1f.2-2, assigned address 4
Mar 20 13:20:08 jackbox1 kernel: printer.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB202
Mar 20 13:20:08 jackbox1 kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Mar 20 13:20:08 jackbox1 kernel: Vendor: HP Model: photosmart 7600 Rev: 1.00
Mar 20 13:20:08 jackbox1 kernel: Type: Direct-Access ANSI SCSI revision: 02
Mar 20 13:20:08 jackbox1 kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Mar 20 13:20:08 jackbox1 kernel: sda: Unit Not Ready, sense:
Mar 20 13:20:08 jackbox1 kernel: Current 00:00: sns = 70 2
Mar 20 13:20:08 jackbox1 kernel: ASC=3a ASCQ= 0
Mar 20 13:20:08 jackbox1 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0c 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Mar 20 13:20:08 jackbox1 kernel: sda : READ CAPACITY failed.
Mar 20 13:20:08 jackbox1 kernel: sda : status = 1, message = 00, host = 0, driver = 08
Mar 20 13:20:08 jackbox1 kernel: Current sd00:00: sns = 70 2
Mar 20 13:20:08 jackbox1 kernel: ASC=3a ASCQ= 0
Mar 20 13:20:08 jackbox1 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0c 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Mar 20 13:20:08 jackbox1 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Mar 20 13:20:08 jackbox1 kernel: sda: I/O error: dev 08:00, sector 0
Mar 20 13:20:08 jackbox1 kernel: I/O error: dev 08:00, sector 0
Mar 20 13:20:08 jackbox1 kernel: I/O error: dev 08:00, sector 0
Mar 20 13:20:08 jackbox1 kernel: unable to read partition table
Mar 20 13:20:10 jackbox1 usb.agent[2007]: ... no modules for USB product 0/0/0
Mar 20 13:20:10 jackbox1 usb.agent[1990]: ... no modules for USB product 0/0/0
Mar 20 13:20:10 jackbox1 usb.agent[1985]: ... no modules for USB product 0/0/0
Mar 20 13:20:12 jackbox1 usb.agent[2098]: kernel driver usb-storage already loaded
Mar 20 13:20:12 jackbox1 usb.agent[2095]: ... no modules for USB product 3f0/b202/100
Mar 20 13:20:12 jackbox1 usb.agent[2092]: ... no modules for USB product 3f0/b202/100

hope you can do something with this

**windos_no_thanks** · 03-20-2004, 10:48 PM

Hmm, one can see the root filesystem being checked but nothing about the others (not sure what should show up though since I don't use xfs on any of my boxes at the moment)...
Have you looked at older parts of /var/log/messages* where things still worked ?

Don't know if this means something but do you always get this ?

Mar 20 13:20:00 jackbox1 kernel: hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 20 13:20:00 jackbox1 kernel:
Mar 20 13:20:00 jackbox1 kernel: hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 20 13:20:00 jackbox1 kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 20 13:20:00 jackbox1 kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }

Have you always had the camera connected during boot ?

**jackren** · 03-20-2004, 11:37 PM

I get a lot more messages and error statements during ( normaly almost none) but they go by so quick I can't realy check them , but i think they are pretty much the same as in /var/log/messages.
What do you mean whit , camera during boot?
I have no camera and it's not connected

which package or script controls the mounting during boot?

**windos_no_thanks** · 03-21-2004, 12:26 AM

Originally Posted by jackren

I get a lot more messages and error statements during ( normaly almost none) but they go by so quick I can't realy check them , but i think they are pretty much the same as in /var/log/messages.
What do you mean whit , camera during boot?
I have no camera and it's not connected

Ah, the photosmart 7600 appears to be a printer. I thought it was a camera since it showed up as a usb storage device but it seems to be a printer with a built-in card reader.

which package or script controls the mounting during boot?

I think it is /etc/init.d/mountall.sh

**jackren** · 03-24-2004, 02:03 PM

when I do : reiserfsck on /dev/hda1 , I get message , cannot read superblock and suggest I do a reiserfsck --rebuild-sb ,
Is this a smart thing to do or not?

ps Is it possible that when I backup / totaly in my home part. and then format / as XFS again and then copie everything back ?. what should I do with lilo in that case?