I am trying to remaster knoppix following the Remastering HowTo. I keep hitting segmentation faults when it comes to the chroot. I have a dual P2-300 machine with a serial console on ttyS1 hooked up, .5Gb RAM, and 3ware IDE raid card with an 240Gb RAID5 array. I'm just trying to make a simple file-server based off knoppix, but I can't even get started. Here's what I do:

boot knoppix.
edit /etc/inittab and enable T1
edit /etc/securetty and change ttyS0 to ttyS1
give root a password
kill -HUP 1
login via serial console
mount -rw /dev/sda2 /mnt/sda2
mkdir /mnt/sda2/knx
Run the following script:
----------------------------------------------------------------------------
#!/bin/sh
MASTER=/mnt/sda2/knx/master
SOURCE=/mnt/sda2/knx/source
CDROM=/cdrom
ISO=/mnt/sda2/knx/knoppix.iso

echo "MASTER is $MASTER"
echo "SOURCE is $SOURCE"
echo "CDROM is $CDROM"
echo "ISO is $ISO"

echo "# rm -rf $MASTER"
rm -rf $MASTER
echo "# rm -rf $SOURCE"
rm -rf $SOURCE
echo "# mkdir $MASTER"
mkdir $MASTER
echo "# mkdir $SOURCE"
mkdir $SOURCE
echo "# mkdir $SOURCE/KNOPPIX"
mkdir $SOURCE/KNOPPIX
echo "# cp -Rp /KNOPPIX/* $SOURCE/KNOPPIX"
cp -Rp /KNOPPIX/* $SOURCE/KNOPPIX
echo "# mkdir $MASTER/KNOPPIX"
mkdir $MASTER/KNOPPIX
echo "# cp $CDROM/index.html $MASTER"
cp $CDROM/index.html $MASTER
echo "# cd $CDROM/KNOPPIX"
cd $CDROM/KNOPPIX
echo "find . -size -10000k -type f -exec cp -p --parents {} $MASTER/KNOPPIX/ \;"
find . -size -10000k -type f -exec cp -p --parents {} $MASTER/KNOPPIX/ \;
echo ""
echo "Done"
---------------------------------------------------------------------
After it completes I try to chroot to /mnt/sda2/knx/souce/KNOPPIX but I always get a segmentation fault. I did 'strace chroot ...' to see if I could figure out what the problem was, but I couldn't seem to make any headway. Here's the tail of the strace if someone can make heads or tails of it:

<snip>
open("/dev/tty", O_RDWR|O_NONBLOCK|O_LARGEFILE) = 3
close(3) = 0
brk(0) = 0x80e5a74
brk(0) = 0x80e5a74
brk(0x80e6000) = 0x80e6000
brk(0) = 0x80e6000
brk(0x80e7000) = 0x80e7000
getuid32() = 0
getgid32() = 0
geteuid32() = 0
getegid32() = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], = 0
time(NULL) = 1080649153
brk(0) = 0x80e7000
brk(0x80e8000) = 0x80e8000
brk(0) = 0x80e8000
brk(0x80e9000) = 0x80e9000
open("/etc/mtab", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=237, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40018000
read(3, "/dev/hda6 / ext2 rw,errors=remou"..., 4096) = 237
--- SIGSEGV (Segmentation fault) @ 0 (0) ---
+++ killed by SIGSEGV +++
root@ttyS1[knx]#

I am not sure where its getting /dev/hda6. /dev/hda is my cdrom. /dev/sda is the raid array. Here's how they come up in dmesg:

hda: MATSHITA CR-583, ATAPI CD/DVD-ROM drive
ide-cd: passing drive hda to ide-scsi emulation.

Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
SCSI device sda: 468898176 512-byte hdwr sectors (240076 MB)
sda: sda1 sda2

I tried doing the chroot on tty0, but I still got the segmentation fault. I tried rebooting, reformating the raid-array, but every time I get the segmentation fault. HELP!!!!!!

thx,
britt