Results 1 to 3 of 3

Thread: What is the difference in various Live cd's?

  1. #1
    Junior Member
    Join Date
    Mar 2004
    Posts
    2

    What is the difference in various Live cd's?

    Hallo All

    One question: I am trying to run the various live cd's on a Toshiba Satellite 1805-S274 laptop.
    The following distro's work:
    SLAX, knoppix MIB 3.2, Vector and MandrakeMove.
    These do NOT work:
    Knoppix Live, Feather, Flonix and Puppy.

    Does anyone here that has more knowledge of Linux than myself have any idea what the difference between these version are? The problem is not with the cd itself. It does work on my desktop. I want to try my hand at my own live cd compilation but it needs to work on the laptop to have any value.

    I managed to do the following with Morphix:

    Using Morphix liveCD on Toshiba Satellite 1805-S274:

    All seems well up to the following message:
    Scanning for Harddisk partitions and creating /etc/fstab...
    At this stage, the boot process just stops and sit there.
    If I then do a ctrl-c, the bootprocess proceeds seemingly normal.

    hda: drive not ready for command
    ide0: reset: success
    hda: irq timeout: status=0x58 {Driveready SeekComplete DataRequest}
    hda: status timeout: status=0xd0 {busy}

    Pushing the on/off button at imme

    morphix dma seems to give a normal boot. Didn't need to do this with the knoppix MiB 3.2 edition.

    MD5 hash of the download matched. CD Data integrity test ok.

  2. #2
    Member
    Join Date
    Oct 2003
    Posts
    55
    Under Knoppix and Feather (no idea about Flonix and Puppy), try booting with:
    "knoppix dma"
    or maybe even:
    "knoppix nodma". If all else fails, try booting with "knoppix noauto". Press F2 at the boot screen for more helpful boot options.

  3. #3
    Member registered user
    Join Date
    Feb 2004
    Posts
    72
    The only difference I noticed between 3.2 and 3.3 was that there was more autodetection, and in my case, I had to select noddc to disable the monitor detection as I had a laptop with an unrecognizable display.

    Knoppix 3.3 has more autodetection.

    Some LiveCD's are compiled for the 686 and up processors only, so they don't run on a AMDk6-2 at all.
    Some distros, such as clusterknoppix, have a 2.88 meg bootimage instead of the 1.44 meg bootimage, which means that my old laptop freaks out when it sees it (Bios does not handle the 2.88 meg El Torito Booting)
    In that case, I had to resort to using a Smart Boot Manager floppy disk to get past the bios booting.


    newer distros tend to drop support for older hardware.
    I doubt that anyone compiles for .386 any more.

    some distros don't have knoppix's autodetect for everything, so they require the user to enter in stuff like screen resolution, depth, mouse type, etc.

    Maybe when they update the cheatcode list, they should tell what new features they have in from the previous version.

Similar Threads

  1. Other Live CD's
    By Harry Kuhman in forum Other Live CDs
    Replies: 20
    Last Post: 11-05-2010, 11:08 PM
  2. Difference between the HDD install options?
    By mors in forum Hdd Install / Debian / Apt
    Replies: 6
    Last Post: 07-21-2005, 09:25 AM
  3. What's the difference in window managers
    By sunburnt in forum General Support
    Replies: 2
    Last Post: 04-11-2005, 05:12 AM
  4. Difference in commands??
    By knopphead in forum Hardware & Booting
    Replies: 2
    Last Post: 04-27-2004, 01:08 AM
  5. what's the difference with sudo ???
    By ptesone in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 03-18-2004, 07:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24 picture

Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24

$117.00



GENUINE CISCO DS-SFP-FC32G-SW SFP NEW SEALED SEE PHOTOS SHIPS FREE picture

GENUINE CISCO DS-SFP-FC32G-SW SFP NEW SEALED SEE PHOTOS SHIPS FREE

$74.99



H3C SFP-FE-T-A Compatible 100BASE-T SFP Copper RJ-45 100m -93651 picture

H3C SFP-FE-T-A Compatible 100BASE-T SFP Copper RJ-45 100m -93651

$38.00



Sonicwall 02-SSC-1874 Compatible 10GBASE-T Copper SFP+ RJ-45 30M Transceiver-876 picture

Sonicwall 02-SSC-1874 Compatible 10GBASE-T Copper SFP+ RJ-45 30M Transceiver-876

$189.05



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T picture

For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T

$48.59



NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping* picture

NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping*

$15.00



GENUINE Cisco SFP-GE-T EXT 30-1421-01 USA 1000BASE-T RJ45 SFP Transceiver picture

GENUINE Cisco SFP-GE-T EXT 30-1421-01 USA 1000BASE-T RJ45 SFP Transceiver

$9.99



LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module picture

LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module

$89.00



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$18.00