-
Acer Aspire 1613 LMi, problems with sound & ACPI and ...
Hi, just got my new laptop and started knoppix. first resolution was not realy ok and sound didn't work.
I looked a bit in the forum and started knoppix with screen=1400x1050 alsa and then both problems where almost gone.
The only problem I still have is that the mixer is not working, I can't use either kmix nor alsamixer, but if I start xmms sound works fine and I can turn the volume up and down.
ok the next issue would be these special buttons from the acer laptop to start the browser or mail programm, its not realy necesary but nice to have has anyone managed to use them ?
ok and the next one would be ACPI I don't even know where to start looking, I'm just installing knoppix on the harddisk and I will check out some links posted here in the forum and will post if I managed to get it running or not.
It's realy anoing not to know how long the battery will last ...
-
Hi dracula,
just bought the same notebook and installed knoppix to the hd. I started it with the screen options you mentioned but without alsa. Havent figured out any problems with the sound yet. The xmms-sound volume works here quite good.
Can you change to shell with Ctrl-Alt-F1?? I can't. *grmpf*
And did you use any special X-driver? The buttons for "Browser etc.."
) can be configured. Found a link yesterday and will post it here.
CU, good luck and write sth if you found out anything new.. ![Smile](images/smilies/icon_smile.gif)
Wonko.
-
I also noticed once a problem with changing to the console, press ctrl+f1 more often.
yes please post the link I also wanted to look for something like this
-
Hi,
couldn't find the exact link, but have a look:
Keyboard HotKeys
The Mail, Browser, P1 and P2 button are supported through the hotkeys program. You can get it from
http://ypwong.org/hotkeys/ .
You will need a suitable keycode configuration file. I wrote this one: aspire1300.def
Put it in /usr/local/share/hotkeys or /usr/share/hotkeys depending on your installation, then open an xterm from inside Xwindows and run
hotkeys -t aspire1300 -b
Debian Specific: first
apt-get install hotkeys
then copy aspire1300.def to /usr/share/hotkeys
Finally edit /etc/hotkeys.conf and change the following lines:
Kbd=aspire1300
WebBrowser=opera
Email=mozilla -mail
In this example you associate the Email button to mozilla mail and the Browser button to Opera file and then you won't have to run it manually anymore.
...taken from http://www.nervous.it/hw/linux_aspir...v.html#HotKeys
you can finde the .def file there aswell.
Thanks to Mr NERvOus..
hope this might help...
Wonko.
-
thx. I will try it as soon as I'm home.
Just bootet with 2.6.5 and works fine excet for my mouse in X, there I found a driver for this touchpad but alas I can't mount my usb stick ( and thats where I downloaded the driver )
but I'll fix this issues as soon as I have more time
-
hmmm.. yes..
i've got some problems with the touchpad aswell.. it doesn't run as "smooth" as under Windows. Just jumps a bit more. No idea why... Is it better with the touchpad driver??
good luck with your USB-stick...
Wonko.
-
could you please post your XF86config ? please please ...
somehow my touchpad doesn't realy work ....
Similar Threads
-
By stevlev in forum Hardware & Booting
Replies: 3
Last Post: 07-29-2005, 08:12 PM
-
By Yuanlong in forum Hardware & Booting
Replies: 3
Last Post: 07-15-2005, 09:12 PM
-
By linuxnoob19 in forum Laptops
Replies: 1
Last Post: 06-06-2005, 10:24 PM
-
By Graham Neal in forum Tips and Tricks
Replies: 1
Last Post: 10-27-2004, 12:35 PM
-
By rompel in forum Laptops
Replies: 3
Last Post: 08-30-2003, 04:12 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Juniper Networks EX2300-C-12T Compact 12-Port EX2300-C Series Ethernet Switch picture](/store/img/g/Dh4AAOSw3Chmbx7U/s-l225/Juniper-Networks-EX2300-C-12T-Compact-12-Port-EX23.jpg)
Juniper Networks EX2300-C-12T Compact 12-Port EX2300-C Series Ethernet Switch
$300.00
![Juniper Networks EX4400-48MP 48 port 5GbE + 12 port 10 Gigabit PoE++ Switch -NEW picture](/store/img/g/QesAAOSw07hmSVQ3/s-l225/Juniper-Networks-EX4400-48MP-48-port-5GbE-12-port-.jpg)
Juniper Networks EX4400-48MP 48 port 5GbE + 12 port 10 Gigabit PoE++ Switch -NEW
$1400.00
![Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord picture](/store/img/g/MswAAOSwuMBl7vhO/s-l225/Juniper-Networks-EX3300-24P-24-Port-Gigabit-Networ.jpg)
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
![Juniper Networks EX2200-C-12P-2G Gigabit Ethernet Managed Switch picture](/store/img/g/dbUAAOSwFd1mey3A/s-l225/Juniper-Networks-EX2200-C-12P-2G-Gigabit-Ethernet-.jpg)
Juniper Networks EX2200-C-12P-2G Gigabit Ethernet Managed Switch
$79.99
![Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested picture](/store/img/g/INMAAOSw6ydmBcA-/s-l225/Juniper-EX3400-48P-48-Ports-PoE-4x-SFP-and-2x-QSFP.jpg)
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$135.00
![Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch picture](/store/img/g/QUAAAOSw9lllAhVU/s-l225/Juniper-Networks-EX3300-EX3300-48P-48-Port-Gigabit.jpg)
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$59.95
![Juniper Networks EX2200-C Ethernet Managed Switch w/ Rack Mounts picture](/store/img/g/63gAAOSwQnNmexRL/s-l225/Juniper-Networks-EX2200-C-Ethernet-Managed-Switch-.jpg)
Juniper Networks EX2200-C Ethernet Managed Switch w/ Rack Mounts
$74.99
![Juniper EX2200-C-12T-2G 12-Port 10/100/1000 2x SFP Uplinks Compact Switch picture](/store/img/g/J8gAAOSw0XBmXdiQ/s-l225/Juniper-EX2200-C-12T-2G-12-Port-10-100-1000-2x-SFP.jpg)
Juniper EX2200-C-12T-2G 12-Port 10/100/1000 2x SFP Uplinks Compact Switch
$74.99
![Juniper Networks SRX220 8-Port Gigabit Services Gateway Security Appliance picture](/store/img/g/W6sAAOSwwFFkHGrv/s-l225/Juniper-Networks-SRX220-8-Port-Gigabit-Services-Ga.jpg)
Juniper Networks SRX220 8-Port Gigabit Services Gateway Security Appliance
$45.00
![Juniper Networks MX80-AC Router 4 Port XFP 10G MIC-3D-200E-SFP picture](/store/img/g/WQAAAOSwgCdmfd3B/s-l225/Juniper-Networks-MX80-AC-Router-4-Port-XFP-10G-MIC.jpg)
Juniper Networks MX80-AC Router 4 Port XFP 10G MIC-3D-200E-SFP
$600.00