My system will boot Koppix fine with only one error during startup(about the i810 chipset-I have and i815). It gets all the way to into KDE (or iceWM it doesn't matter) and the system hard locks--Ctrl-Alt-Delt doesn't even work!
The CD works on other computers-I burned several and they all work elsewhere. It did work the first time I ran it, but now it won't.
I have reletively basic hardware Asus 815ep board, radeon 64M vivo [agp}, SB live value [pci 3] (with pnp off to detect), a 10/100 ovislink nic [pci 5], and a 10/100/1000 nec? nic [pci 1]. The modem/dsl is external. The set-up works OK with windows (same bios settings) There has to be some conflict in assigning IRQ/DMA that Knoppix can't handle--
Am I missing something in my BIOS setup, cards, etc?
thanks
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-FE-100LX 100BASE-LX SFP Transceiver Module
$15.59
Cisco GLC-FE-100LX-RGD 100BASE-LX SFP Transceiver Module
$17.99
Cisco w/ Green Hologram SFP-25G-SR-S 25G SFP28 SR 850nm 100m LC MMF
$68.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$23.99
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00