-
CD ignored and floppy boot
I downloaded the iso dated 10-12-02 and verified the md5 checksum on the file prior to burning to CD. I have set bios to boot from CD but the CD it is ignored and proceeds to next boot device HD/floppy.
I then created a boot floppy, booted and selected "expert" and see a message as Knoppix tries to locate the CDROM device but fails to locate and then I dropped back to "very limited shell"....
Please advise what I should do from the limited shell.
Any other suggestions? Download the latest iso and try again?
I tried the mount command but this caused a kernel panic. Please let me know if I can assist the Knoppix team by providing any error messages (I know that may be difficult at this stage of my install...)
System is AthlonXP1800 256MB DDR on ASUS A7V333.
Nvidia Geforce4 MMX (Leadtek A170TH)
-
Senior Member
registered user
Re: CD ignored and floppy boot
--The "very limited shell" is bloody USELESS and IMHO should just be deleted.
--If you mount your burned CD under Windows, do you see only 1 file on it (the ISO?) If so, you pulled a Dave_Bechtel and forgot to burn the CD using the ISO as a **filesystem image.** "Thank you, try again..."
Originally Posted by
squash_racket
I downloaded the iso dated 10-12-02 and verified the md5 checksum on the file prior to burning to CD. I have set bios to boot from CD but the CD it is ignored and proceeds to next boot device HD/floppy.
I then created a boot floppy, booted and selected "expert" and see a message as Knoppix tries to locate the CDROM device but fails to locate and then I dropped back to "very limited shell"....
Please advise what I should do from the limited shell.
Any other suggestions? Download the latest iso and try again?
I tried the mount command but this caused a kernel panic. Please let me know if I can assist the Knoppix team by providing any error messages (I know that may be difficult at this stage of my install...)
System is AthlonXP1800 256MB DDR on ASUS A7V333.
Nvidia Geforce4 MMX (Leadtek A170TH)
-
Dave,
Thankyou for the tip! It works beautifully now. I haven't had to specify the burn image requirement on freebsd cd's I have burned previously.
Thanks
Similar Threads
-
By niceguy167 in forum Hardware & Booting
Replies: 4
Last Post: 10-30-2004, 05:06 AM
-
By Total Immortal in forum Tips and Tricks
Replies: 6
Last Post: 06-07-2004, 04:11 PM
-
By proto in forum General Support
Replies: 3
Last Post: 03-17-2004, 11:29 PM
-
By Prieni in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 03-05-2003, 02:52 PM
-
By Dan_Netwalker in forum Hdd Install / Debian / Apt
Replies: 7
Last Post: 02-23-2003, 01:40 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HP/HPE ProLiant AMD Opteron X3216 APU 16 GB RAM MicroServer Gen 10 NO DRIVES
$299.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
HP ProLiant Xeon E3-1220L V2 2.30 GHz 16 GB RAM MicroServer Gen8 NO DRIVES
$199.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
Supermicro 2U Server 12 Caddy Bay 3.5 LFF E ATX Storage Chassis SAS2 6GBPS Rail
$199.00