Newbie here and though I have gotten rather good at compiling kernels, hardly need my crib notes anymore, I certainly stink at configuring them. What I want is to get the source on my hd installed Knoppix 3.3 debian. So I downloaded http://developer.linuxtag.net/knoppi...Custom_all.deb
and follow the directions here: http://newbiedoc.sourceforge.net/tut...el-pkg.html.en.
My home-brewed configurations boot that is all I can say about them I like my present configuration and so gave a try with "make oldconfig" using the config for my hd install here. But it fails to boot, I have kernel panic, no init found. Could someone give me an idea where I went wrong there? In Lilo, I use the same initrd=/boot/initrd.gz as my working kernel. I am missing something really basic here, aren't I?
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.22
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00