-
help knoppix cant see my usb drive have read all faqs
hello, i'm new to linux, using knoppix on new systemax tourbook laptop
when i run knoppix from cd it boots up fine and recognises usb (or at least mentions usb) during loading but once i get into it, the system
can't see my usb drive. my hard drive comes pre-mounted as hda1, where is the usb drive? i read the faq, there is no sda or
sda1,there is a dev/usb/ but with millions of entries so how do i know which is the usb drive, do i have do mount it myself and
if so how ?
have read stuff here and tried things
when i run lsusb i get
bus 003 device 001:10 0000:0000
bus 002 device 001:10 0000:0000
bus 001 device 001:10 0000:0000
if that's any help. as you can see i don't know what i'm doing so idiotproof instructions would be great!
thanks
mary
-
If you run "dmesg" in a console you can look for lines like this:
USB Mass Storage support registered.
hub.c: new USB device 00:10.0-2, assigned address 5
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: FUJITSU Model: MHJ2181AT Rev: 0811
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 35433216 512-byte hdwr sectors (18142 MB)
sda: sda1 sda2 < sda5 sda6 > sda4
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 5
To see if your drive has been found. You can then mount it yourself with mount /dev/sda6 /mnt/sda6 (tho with the number of the partition you want).
I had a problem lately where the ehcd-hcd module was preventing my usb drive from working. You can try removing that module with rmmod ehcd-hcd and disconnect and reconnect your usb drive and see if it was found.
-
Try to boot another machine with Knoppix and conncet the USB drive there. I have had many USB dispositives.
1 Usb 1.0 64 mb thumb disk Cigarr Pro, work flawlessly
1 Usb 2.0 128 mb thumb disk Apacer, no way in Linux
1 Usb 2.0 256 mb thumb disk gneric, no way in Linux (appears in the desktop but the system was unable to read it)
1 Usb 1.0 IDE enclosure generic, no way in linux
1 Usb 2.0 IDE enclosure generic, work flawlessly
So, is a tricky task. Some USB work without a glitch, another need more work
-
Originally Posted by
mightydavefish
If you run "dmesg" in a console USB Mass Storage device found at 5....
To see if your drive has been found. You can then mount it yourself with mount /dev/sda6 /mnt/sda6 (tho with the number of the partition you want).
thanks, that's just the kind of precise info i needed.
I had a problem lately where the ehcd-hcd module was preventing my usb drive from working. You can try removing that module with rmmod ehcd-hcd and disconnect and reconnect your usb drive and see if it was found.
I'd love to pretend i understood that last bit...
thanks for replying, and with just the kind of precise info i needed.will try this later when my brain comes back online.
-
Originally Posted by
mcaycedo
Try to boot another machine with Knoppix and conncet the USB drive there. I have had many USB dispositives.
1 Usb 1.0 64 mb thumb disk Cigarr Pro, work flawlessly
1 Usb 2.0 128 mb thumb disk Apacer, no way in Linux
1 Usb 2.0 256 mb thumb disk gneric, no way in Linux (appears in the desktop but the system was unable to read it)
1 Usb 1.0 IDE enclosure generic, no way in linux
1 Usb 2.0 IDE enclosure generic, work flawlessly
So, is a tricky task. Some USB work without a glitch, another need more work
aha i never thought it could be the usb drive itself... its a bytestor 128mb usb 2 i suspect by the build quality that it's at the lower end of the market... will try on my dad's machine and then get my muvo back from my brother and try that one too. thanks for the tip.
Similar Threads
-
By naterd00d in forum Hardware & Booting
Replies: 1
Last Post: 07-13-2004, 09:09 PM
-
By Keilaron in forum Hardware & Booting
Replies: 3
Last Post: 01-23-2004, 04:56 AM
-
By socalgail in forum General Support
Replies: 2
Last Post: 08-24-2003, 04:29 AM
-
By jratlif2 in forum Hardware & Booting
Replies: 11
Last Post: 07-24-2003, 06:12 PM
-
By powertc_g4 in forum General Support
Replies: 6
Last Post: 07-22-2003, 04:22 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R640 Server | 2x Gold 6132 28 Cores | H730p | Choose RAM / DRIVES
$2630.00
### MZ-7KE1T0 Samsung 850 Pro Series 1TB 2.5 inch SATA3 SSD ###
$105.00
M.2 NVME SATA SSD Enclosure USB 3.2 Gen 2 10Gbps for M-Key or M+B Key SSD to 8TB
$19.86
804625-B21 HPE 800GB SATA 6G MIXED USE SFF (2.5IN) SC SSD 805381-001
$67.00
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$14.99
Micron 5100 MAX 120GB SATA 6Gb/s 2.5" Internal SSD MTFDDAK120TCC Solid State
$9.99
Intel DC S3510 Series 120GB SSD 2.5" 6Gb/s SATA Solid State Drive SSDSC2BB120G6K
$9.99
Western Digital PC SN730 256GB NVMe SDBQNTY-256G M.2 2280 PCIe Solid State (SSD)
$16.00
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$109.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot
$198.99