Try typing inknoppix xvrefresh=60 xmodule=ati screen=1024x768 at the boot screen then enter. You probably only need the xvrefresh=60 cheat code in the line and you can use a lower screen value if you want.
I am struggling to run knoppix on a machine that is my main linux box.
Its starts fine, goes as far as entering run level 5, then I see starting X11, then the screen goes blank and after a while the monitor goes on standby.
The CD and hard drive keep working so I guess its a video card / monitor issue.
The videocard is an onboard ATI 3D rage pro and the monitor a Mag 1595
This occurs with both knoppix 3.3 and knoppix 3.4-ct
I have installed RH 9 and SUSE 9 Pro on this machine before without a problem
I've looked in the FAQs and tried running as VGA=VESA and the other one recommended ( this is from memory so I could have got it the wrong way around)
Can any one point me in the right direction?
thanks a mil
:P
Try typing inknoppix xvrefresh=60 xmodule=ati screen=1024x768 at the boot screen then enter. You probably only need the xvrefresh=60 cheat code in the line and you can use a lower screen value if you want.
Stephen you are a star
the xvrefresh=60 did the trick
what was going wrong with the normal boot? and how did you pick that up?
thanks a mil
It is older hardware that monitor will not do the 72 hz refresh rate (IIRC) at 1024x768 that knoppix tries to use when it starts X. I have an old Acer here that was made around the same time as yours the best I can get it to use is 67 hz.Originally Posted by DinB
ok that explains it, intersting it was not an issue with RH or SUSE, but now I know
thanks again stephen
Never happened to me with Mandrake either, I have the same ATI card in that machine only Knoppix has a problem with the monitor if I put a more recent model of monitor there it works fine. Strangely enough Knoppix will do 1152x768/60hz on that monitor but no other distro will so go figure eh!Originally Posted by DinB
Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch
$42.00
Cisco Catalyst WS-C3650-24PS-L 24-Port Gigabit Ethernet Network Switch TESTED
$49.99
Dell PowerConnect 6224 Rackmount 24-Port Gigabit Managed Ethernet Network Switch
$31.99
NETGEAR GS108 ProSafe (GS108-400NAS) 8 Port Standalone Gigabit Ethernet Switch
$44.99
TP-LINK TL-SF1005D 5-Port 10/100Mbps Desktop Switch
$8.99
NETGEAR GS305E 5-Port Gigabit Ethernet SOHO Plus Switch
$5.99
TP-Link Metal 8-Port Gigabit Ethernet Switch Fanless Unmanaged L2+ TL-SG108(UN)
$15.00
Brocade ICX7250-24P-2X10G 24-Port Managed Switch
$89.95
TP-Link 24-Port Gigabit Ethernet Unmanaged Switch Desktop/Rackmount TL-SG1024D
$59.49
Cisco WS-C3750X-48PF-S 48 Port PoE Gigabit Switch w/ C3KX-NM-10G & Dual 1100WAC
$114.88