Try typing inknoppix xvrefresh=60 xmodule=ati screen=1024x768 at the boot screen then enter. You probably only need the xvrefresh=60 cheat code in the line and you can use a lower screen value if you want.
I am struggling to run knoppix on a machine that is my main linux box.
Its starts fine, goes as far as entering run level 5, then I see starting X11, then the screen goes blank and after a while the monitor goes on standby.
The CD and hard drive keep working so I guess its a video card / monitor issue.
The videocard is an onboard ATI 3D rage pro and the monitor a Mag 1595
This occurs with both knoppix 3.3 and knoppix 3.4-ct
I have installed RH 9 and SUSE 9 Pro on this machine before without a problem
I've looked in the FAQs and tried running as VGA=VESA and the other one recommended ( this is from memory so I could have got it the wrong way around)
Can any one point me in the right direction?
thanks a mil
:P
Try typing inknoppix xvrefresh=60 xmodule=ati screen=1024x768 at the boot screen then enter. You probably only need the xvrefresh=60 cheat code in the line and you can use a lower screen value if you want.
Stephen you are a star
the xvrefresh=60 did the trick
what was going wrong with the normal boot? and how did you pick that up?
thanks a mil
It is older hardware that monitor will not do the 72 hz refresh rate (IIRC) at 1024x768 that knoppix tries to use when it starts X. I have an old Acer here that was made around the same time as yours the best I can get it to use is 67 hz.Originally Posted by DinB
ok that explains it, intersting it was not an issue with RH or SUSE, but now I know
thanks again stephen
Never happened to me with Mandrake either, I have the same ATI card in that machine only Knoppix has a problem with the monitor if I put a more recent model of monitor there it works fine. Strangely enough Knoppix will do 1152x768/60hz on that monitor but no other distro will so go figure eh!Originally Posted by DinB
Cisco SG110 8 Port Gigabit Ethernet Switch SG110D-08-UK
$39.00
Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24
$117.00
Cisco SG110-16HP 16-Port Gigabit PoE Unmanaged Switch SG110-16HP-NA
$108.00
Cisco SG95-16 16-Port Gigabit Switch SG95-16-SG
$47.00
New Linksys SE3005 5-port Gigabit Ethernet Switch
$18.99
New 10/100 Mbps 8 Ports Fast Ethernet LAN Desktop RJ45 Network Switch Hub
$11.49
NETGEAR GS308 8 Gigabit Port Unmanaged Ethernet Switch with Power Cord
$12.95
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
Netgear ProSafe S3300-52X-POE+ 48-Port Gigabit PoE+ Stackable Network Switch
$100.95
Netgear Prosafe Plus JGS524PE 24 Port Gigabit Switch 12 Port PoE JGS524PE-100NAS
$129.98