Hi, what you have to do is to open a knoppix shell and execute 'xhost +' to
allow other users (such as root with synaptic) execute programs in your
X-session.
I hope it helps,
Ramon Acedo
Hi
I have installed Synaptic into my chrooted environment but get an error "synaptic:could not open display"
I have read the instructions that say you have to export DISPLAY........
#DISPLAY=myip:0.0 (replace my ip with your actual IP)
#export DISPLAY
#synaptic
I have tried this with every combination I can think of but nothing is working. This is the output:-
Setting up synaptic (0.16-6) ...
root@not a tty[/]# synaptic
synaptic:could not open display
root@not a tty[/]# DISPLAY=211.26.141.228
root@not a tty[/]# export DISPLAY
root@not a tty[/]# synaptic
synaptic:could not open display
root@not a tty[/]# DISPLAY=203.134.64.66
root@not a tty[/]# export DISPLAY
root@not a tty[/]# synaptic
synaptic:could not open display
root@not a tty[/]# DISPLAY=127.0.0.1
root@not a tty[/]# export DISPLAY
root@not a tty[/]# synaptic
synaptic:could not open display
root@not a tty[/]# DISPLAY=iprimus:0.0
root@not a tty[/]# export DISPLAY
root@not a tty[/]# synaptic
_X11TransSocketINETConnect: Can't get address for iprimus
synaptic:could not open display
root@not a tty[/]# DISPLAY=203.134.14.21
root@not a tty[/]# export DISPLAY
root@not a tty[/]# synaptic
synaptic:could not open display
root@not a tty[/]# DISPLAY=iprimus:203.134.14.21
root@not a tty[/]# export DISPLAY
root@not a tty[/]# synaptic
synaptic:could not open display
root@not a tty[/]# DISPLAY=iprimus:0.0
root@not a tty[/]# export DISPLAY
root@not a tty[/]# synaptic
_X11TransSocketINETConnect: Can't get address for iprimus
synaptic:could not open display
root@not a tty[/]#
I am obviously doing something wrong
Thanks for any help
Trish
Hi, what you have to do is to open a knoppix shell and execute 'xhost +' to
allow other users (such as root with synaptic) execute programs in your
X-session.
I hope it helps,
Ramon Acedo
Hi Ramon
Thanks for the tip.
I 'think' I had already done that. My local Linux User Group guru also suggested that I do
"DISPLAY=127.1.1.0:0.0" (myip being 127.0.0.1)
but this didn't work.
So I have given up (for now) until I have quite a bit more knowledge about Linux in general.
Thanks
Trish
You have to enable the remote client host to connect at the X server. Open a terminal directly on your X server, as the user that did a startx or that logged into the X server. At the prompt, type:Originally Posted by my2cents
This permits the local host to connect. Then back at your client environment (chrooted was it?) run this:Code:$ xhost +127.0.0.1
...and it should work.Code:# export DISPLAY=127.0.0.1:0.0 # synaptic
Just to be sure: don't type "$" or "#" ... but you knew that, right?
Hi David
That sounds very much like the 'missing link' I'll do that when I start 'playing; again.
Thanks very much
Trish
Read the questions and comments above and did the following in terminal mode after an update from knoppix 3.3 2004-02-09 beta.
--------
root@water:/# xhost +127.0.0.1
127.0.0.1 being added to access control list
root@water:/# export display=127.0.0.1:0.0
root@water:/# synaptic
Package pcmcia-modules-2.4.8 has no section?!
Package sysvinit-knoppix has no section?!
root@water:/# debtags update
Merging system vocabularies...
Downloading tag database...
Acquiring source http://people.debian.org/~enrico/tags/
....[snipped]
Reading data from /var/cache/debtags/http___people_debian_org__enrico_tags_
Done.
root@water:/#synaptic
----------
This works, but I have to start Synaptic as SU (and the quickest way that I know is in a terminal window) being a user not being root.
I would like to have the small dialog 'run as root'. How can I do that?
I also wonder about the 'no section ?!' errors, but that will be in another mail.
Paul
I tried :
knoppix$ xhost +
knoppix# chroot (sources/KNOPPIX)
no matter what I try, I keep getting 'GK Warning unable to open display.
Does this really work for anyone? What else could I try to get this to work?
I did a debian hd install and I tried it from there, and I tried it from the Knoppix 3.3 CD. I read the man pages on xhost, looked on the net for any other help and X in a chroot window just isnt working for me. Could someone PLEASE tell me step by step what they do to make this work?
Help!!!
mine messes up do i dont know how to fix it
here is what i get
Code:Xlib: connection to ":0.0" refused by server Xlib: No protocol specified (synaptic:961): Gtk-WARNING **: cannot open display:
#DISPLAY=myip:0.0 ( replace "myip" with your actual IP)
#export DISPLAY
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 32GB | P204I | 2x900GB 10KRPM
$1499.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
Dell PowerEdge VRTX 2x PowerEdge M630 Blade Server 512GB Ram Total w/ Rails
$1750.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge M620 Blade Server
$39.99