-
Senior Member
registered user
sid is the code name for unstable
-
Senior Member
registered user
back to original topic of this thread: munjoy=nojoy for me, at least
Checksum is good. It just won't load though it boots. I have watched carefully at least a dozen times and I get no pause/prompt for input. It boots, there is a grey screen that goes by very quickly where I catch loading vmlinuz blah blah, then onto the the black screen with little penquin, says "munjoy linux install CD...blah blah knoppix...init version 2.8 knoppix booting? blah blah.....then loading"
and there it sits. I have kept it up as much as a half hour but there is no progress. Tried in both my cd and burner drives. Not sure what else is left to try until I get my spare box back together for a go in that.
-
Senior Member
registered user
I see that the Munjoy site now has it's own forum section so folks may want to post questions and give feedback there.
http://www.munjoylinux.org/forums/
-
Senior Member
registered user
thanks Aay. I just signed up and posted there.
-
Re: New Debian based Distro
I'm typing this on it right now. So far I'm mostly happy with it as an actual item, and very happy with it as far as being an initial release. Considering the complexities of something like this, what problems I've had seem pretty minor.
The good: Great alsa setup, I like the little touches to try to make it more desktop friendly.
The bad: I tried dist-upgrading to sid and afterward it wouldn't boot anymore.
But, all in all, I think they've got a good thing on their hands.
-
Senior Member
registered user
Joe, have you tried Kanotix? A little closer to sid than even Knoppix. I have upgraded more than I ever tried with knoppix and haven't broken it yet though I am very cautious.
My munjoy=nojoy continues, to date no response to my problem. I did put my spare box back together yesterday and booted munjoy on that. Happily it did boot and LOADED and I got to the installer. Then it failed, repeatedly saying no disk was chosen to partition when I repeatedly chose hdb2.
No idea why it won't load on my newer machine. Thought the error on the spare was due to the ancient and much abused 5 or 6 yo HD in there. But afterwards knoppix installed fine on same disk. Will have to just put away munjoy for now and hope there isn't some sort of hopeless incompatibility with my amd herd and the 2.6 kernel.
Similar Threads
-
By bongski55 in forum General Support
Replies: 4
Last Post: 10-28-2004, 09:41 AM
-
By silian87 in forum Customising & Remastering
Replies: 4
Last Post: 03-15-2004, 06:46 AM
-
By jfsebastian in forum Customising & Remastering
Replies: 3
Last Post: 03-02-2004, 06:40 PM
-
By mmw1231 in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 01-24-2004, 02:18 AM
-
By pilovis in forum General Support
Replies: 2
Last Post: 03-28-2003, 09:17 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
Dell PowerEdge R730 8 SFF 2x E5-2660 v4 28 Cores 128/256GB 0/3x 900GB 6Gbps H730
$349.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00
DELL R730XD Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4x 1.2TB SAS 4xRJ45
$504.00