You can specify the ip address in the /etc/init.d/knoppix-autoconfig file.
Use something like this:
/sbin/ifconfig $ipaddr netmask $subnet
/sbin/route add default gw $gateway
Jonathon.
Hello,
installing KNOPPIX for remastering purposes was no problem. Now I want to assign a IP-Adress so that I don't have to use netcardconfig every time after booting from the CD. What must I do? Is it sufficient to execute netcardconfig on the hard disc? Is the created /etc/network/interfaces then used in the new image?
Thanks in advance,
Armin Herzer
You can specify the ip address in the /etc/init.d/knoppix-autoconfig file.
Use something like this:
/sbin/ifconfig $ipaddr netmask $subnet
/sbin/route add default gw $gateway
Jonathon.
Thank you, I will try it!
Armin
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 727263-003 BL460c G9 Raid BBWC Smartstorage Battery
$24.99
Dell R630 8SFF 2.1Ghz 16-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$425.04
Dell R740XD2 26LFF 3.6Ghz 8-C 384GB H730P MINI RAID 2x10G SFP+ NIC 2x1100W Rails
$2998.08
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99