its because the current 3.3 version doesn't support SATA yet maybe?
Hey..
No variant of knoppix wants to work on my pc, i tried to boot gnoppix, it boots fine but after a few seconds it just reboots itself.
then i tried morphix that gives me the only one cpu error, i tried the cheat with "morphix nosmp" the error goes away but the system doesn't boot and hangs at the start of the procedure with no output.
i tried something else, not a knoppix variant.. SLAX ... freezes at the boot procedure under Attached ide device or something like that...
my system is :
p2.6 HT
512MB DDR
MSI Neo2 Motherboard
120 GB Sata raid hardrive
pleaseee help me guys !!!
thanks alot...
its because the current 3.3 version doesn't support SATA yet maybe?
Probably if you disable your SATA controller in the bios it will boot.
ok.. the sata problem explains why slackware doesn't boot...
but gnoppix does boot and reboots itself automatically
and afaik the only one cpu problem in morphix is not sata related...
on another note, how come morphix and gnoppix have different errors, aren't they both made from knoppix..?
i disabled sata and the only thing that would boot was slax..
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell Poweredge XC730xd 3.5 2x E5-2690 v3 2.6ghz 64gb JBOD 12x Trays 2x1100w
$239.99
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
Dell Poweredge R620 8-Bay CTO Pick your CPU & RAM Config | H710 Raid | 2x PSU
$209.99
Dell R730 8B LFF 2x 2.40GHz 14C Intel Xeon E5-2680 v4 32GB RAM 2x 3TB HDD HBA330
$299.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell Poweredge R640 8 SFF Server No HDDs/ CPUs/ RAMs/ Cards/Fan/PSU
$419.99