Moin,
seit ich mein Knoppix 6.0.1 auf "squeeze" umgestellt/geupgraded habe kommt beim Start die Fehlermeldung
Can't access the Hardware Clock via any known method
Ich fand eine Lösung im Netz ... einfach in /etc/moduls noch das Modul "rtc-cmos" eintragen. Leider gibt es dieses
Modul nicht. Kann mir jemand sagen welches Modul ich anstelle dieses installieren muss, bzw. welches Paket?
Es handelt sich um einen Dell Inspiron Laptop und Knoppix läuft von USB-Stick.
Grüße und schon einmal Danke,
beambot
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$28.52
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$44.62
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$209.99
HDD 3.5" SATA Hard Drive with Windows 7/Win 10 Installed Legacy
$35.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$18.99
Seagate Exos X14 12TB SATA6Gb/s 7200RPM 3.5" Enterprise Hard Drive ST12000NM0558
$99.95
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$78.99
Seagate IronWolf Pro 18TB 7.2K 6G 3.5 SATA HARD DRIVE - ST18000NE000
$219.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99