-
Knoppix 9.0.0 is out ...
Hello,
Knoppix 9.0.0 is out. Thank you Klaus !
No idea how to get my hands on it though ...
With the travel ban and CA is not really close to Germany anyway.
Stay healthy,
Gilles
http://www.knopper.net/knoppix/knoppix900.html
-
Senior Member
registered user
Thank you for the information.
Debian has also released a Stretch 9.12 as a security update.
Already downloaded and using Knoppix 8.6.1. It won't be feasible to download the latest release. However, when the Knoppix reaches the end cycle of Buster, then that ISO shall be downloaded.
Once again, thank you for the good news.
Regards,
Rajib
-
Knoppix 9 dual boot from iso on win 10 ntfs nvme partition.
Hi Klaus,
I hope my email finds you and your loved one healthy and happy.
I am just sharing some findings that you may be interested in adding into your next Knoppix release. I finally managed to dual boot natively Knoppix 9 from the iso image located in the Win 10 ntfs partition of the nvme ssd drive of my new machine and that was more complicated than I initially thought. Most of my problems came from the outdated version of busybox in the initrd which 1) was not seeing the large (>255) major device nodes and 2) could not see the content of the mounted ntfs partition because it was too large. After recompiling a standalone version of busybox with the proper options (and there is quite a few of them that matter) I also had to update the init boot script to replace all the "let" bash calls by "$(eval )" because I could not figure out how you got busybox to recognize that "let" applet. Finally I also had to add a couple lines in the init script to add the missing device nodes for the nvme partitions because udev is not yet running to discover them in the early stages of the boot. BTW, I also added support to boot from mmc cards which are available on most new laptops. If you are interested I will be more than happy to share my updated initrd which contains the new: init script, busybox and also some missing kernel modules (fuse, virtual machines hardware and all network cards support).
Best Regards,
Gilles
http://s94002264.onlinehome.us/grub/k900/minirt_900.gz
http://s94002264.onlinehome.us/grub/k900/minirt_900.tgz
kernel /linux64 bootfrom=/dev/nvme0n1p2/[bB][oO][oO][tT]/k900/*.iso myconf=scan ...
initrd /minirt_900.gz
Last edited by ruymbeke; 06-22-2020 at 08:08 AM.
-
Good, but from where can we get iso image - Corona Lockout
Can you share the Ver 9 - EN iso image, know it is huge, but will be useful for knoppix users.
U can use sourceforge or google drive.
Thanks for sharing.
Originally Posted by
ruymbeke
Hi Klaus,
I hope my email finds you and your loved one healthy and happy.
I am just sharing some findings that you may be interested in adding into your next Knoppix release. I finally managed to dual boot natively Knoppix 9 from the iso image located in the Win 10 ntfs partition of the nvme ssd drive of my new machine and that was more complicated than I initially thought. Most of my problems came from the outdated version of busybox in the initrd which 1) was not seeing the large (>255) major device nodes and 2) could not see the content of the mounted ntfs partition because it was too large. After recompiling a standalone version of busybox with the proper options (and there is quite a few of them that matter) I also had to update the init boot script to replace all the "let" bash calls by "$(eval )" because I could not figure out how you got busybox to recognize that "let" applet. Finally I also had to add a couple lines in the init script to add the missing device nodes for the nvme partitions because udev is not yet running to discover them in the early stages of the boot. BTW, I also added support to boot from mmc cards which are available on most new laptops. If you are interested I will be more than happy to share my updated initrd which contains the new: init script, busybox and also some missing kernel modules (fuse, virtual machines hardware and all network cards support).
Best Regards,
Gilles
http://s94002264.onlinehome.us/grub/k900/minirt_900.gz
http://s94002264.onlinehome.us/grub/k900/minirt_900.tgz
kernel /linux64 bootfrom=/dev/nvme0n1p2/[bB][oO][oO][tT]/k900/*.iso myconf=scan ...
initrd /minirt_900.gz
-
Senior Member
registered user
Originally Posted by
ruymbeke
Hi Klaus,
I hope my email finds you and your loved one healthy and happy.
I am just sharing some findings that you may be interested in adding into your next Knoppix release. I finally managed to dual boot natively Knoppix 9 from the iso image located in the Win 10 ntfs partition of the nvme ssd drive of my new machine and that was more complicated than I initially thought. Most of my problems came from the outdated version of busybox in the initrd which 1) was not seeing the large (>255) major device nodes and 2) could not see the content of the mounted ntfs partition because it was too large. After recompiling a standalone version of busybox with the proper options (and there is quite a few of them that matter) I also had to update the init boot script to replace all the "let" bash calls by "$(eval )" because I could not figure out how you got busybox to recognize that "let" applet. Finally I also had to add a couple lines in the init script to add the missing device nodes for the nvme partitions because udev is not yet running to discover them in the early stages of the boot. BTW, I also added support to boot from mmc cards which are available on most new laptops. If you are interested I will be more than happy to share my updated initrd which contains the new: init script, busybox and also some missing kernel modules (fuse, virtual machines hardware and all network cards support).
Best Regards,
Gilles
http://s94002264.onlinehome.us/grub/k900/minirt_900.gz
http://s94002264.onlinehome.us/grub/k900/minirt_900.tgz
kernel /linux64 bootfrom=/dev/nvme0n1p2/[bB][oO][oO][tT]/k900/*.iso myconf=scan ...
initrd /minirt_900.gz
Great!
Seems to me that this should be merged into the standard distro if it isn't already?
Would be nice to have the busybox updating recipe too, plus possibly just the patched init script.
-
Hello folks,
with Knoppix 9.0 >>
the (busyBox) Shell script /sbin/shutdown' tells you, that
'shutdown -r' now is possible only with command
'shutdown reboot', but reboot doesn't work
(it does lead to 'poweroff').
because i always do shutdown
via PuTTY, i missed this feature
really (with tears in my eyes)
many greetings,
Fred
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge M640 Barebone Server Blade No Hard Drive Trays
$499.00
Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM
$45.00
Cisco B200 M4 Blade Server-No Ram
$50.00
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.23
Dell PowerEdge M820 4x Xeon E5-4600 Blade Barebone Server NO CPU RAM HDD CADDY
$199.89
DELL PowerEdge M630 Blade 2x E5-2687Wv3 3.1GHz =20 Cores 32GB H330 2x10Gb X520
$193.00
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$275.00