This was moved, as it so obviously belongs in the hdd install forum.
how do I install a swap file If I installed knoppix on a single hard drive??? I did not make a linux swap drive, and dont have any other partitions, I just have the one that has knoppix is installed on.
the knoppix swap file config. program doesnt seem to support this? any have an idea??
This was moved, as it so obviously belongs in the hdd install forum.
Hi,
you can always use a file as swap area; this works as following:
- first open a root shell (from the KNOPPIX menu or otherwise)
- decide where to put the swap file; /var/run/swapfile might be a good place,
but YMMV
- decide how much space the swap file should take (eg 128M)
- create the swap file:
dd if=/dev/zero of=/var/run/swapfile bs=1024k count=128
- create the swap signature:
mkswap /var/run/swapfile
- add the swap file to /etc/fstab as a line containing:
/var/run/swapfile none swap defaults 0 0
- activate the swap file:
swapon -a
If no errors occured, you now should have 128M swap. Check with "top"
or by issueing "cat /proc/swaps"
Ciao,
Thomas
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
Supermicro 1U X11DPU 2x Xeon Gold 6132 2.6GHz / 128gb / 10x 2.5 Trays / 2x 750w
$649.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
SuperMicro CSE-836 16LFF Server X9SCL+-F Xeon E3-1220V2 3.10GHz CPU 8GB RAM
$169.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.48
$100.00
HP HPE Microserver Gen 7 8 9 iLO 2/3/4/5Advanced License Lifetime Key| FAST SHIP
$10.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00
Custom Server 15" Depth X11SSH-F E3-1270 V6 3.8Ghz 4 Core - 128GB NVME 32GB RAM
$399.00