The work around mentioned above works well with Knoppix 3.4. However, when I try to do the same thing with Knoppix 3.6, I get this error:
"Could not find ramdisk image: miniroot.gz" at boot:
Does anyone know what is wrong?
Thanks.
Any further word on if there is a solution to get Knoppix-terminal working after doing knxhd-install? I'm going to try the work-around listed above, but I was wondering if anybody has made any headway into getting it to work properly.
Thanks!
-Devlyn
The work around mentioned above works well with Knoppix 3.4. However, when I try to do the same thing with Knoppix 3.6, I get this error:
"Could not find ramdisk image: miniroot.gz" at boot:
Does anyone know what is wrong?
Thanks.
Sorry to revive this topic, but I need some help on this..
Have a diskless cluster going. Running ClusterKnoppix and openmosixview....
Here's what I've done so far.
Master node has the HD install of clusterknoppix and I've run knoppix-terminalserver. I copied the the KNOPPIX/KNOPPIX to /cdrom/
so it has /cdrom/KNOPPIX/KNOPPIX
Now, when I turn on the slave nodes on, they get to booting but then I get the:
"Can't find KNOPPIX filesystem, sorry."
error..
Sorry, I'm not exactly..... experienced.... in Linux. So any help is GREATLY appreciated.
EDIT: all motherboards are the exact same.
Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU
$499.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
$169.99
$599.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00