-
newbie question on booting in windows 98
Have Knoppix disk, but don't know how to change the startup file so that the CD drive is used for bootup. Understand that this is an initialization script, but don't know how to pull up. Want to retype the script so that the if the Knoppix disk is in, then Knoppix boots from the CD.
-
Senior Member
registered user
there is no script you have to change. your COMPUTER has to boot from cd. this has to be changed in the BIOS. This is on-chip in your computer. when you boot, you'll see a message like "hit the DEL key to enter setup". It might also be F1, or another key - but this "setup" is the bios. there you can find something like "bootupsequence", in my pc it is "first boot device =" "second boot device =" etc.
good luck!
-
I had/am having the same problem and I have a win 98 so it may help you to look at my chat messages under the title "earlier version of knoppix"
hope this helps
-
Senior Member
registered user
This isn't really a win 98 issue, it's a BIOS issue. The BIOS settings come before the operating system is loaded. As indicated in the other posts, what you have to do is find out what key your computer uses to kick you into the bios settings (usually it's esc or F1) then change the settings so that it will boot from CD first before it tries to boot from the HD. You hold down the key as soon as you push the start button, don't wait for it to boot.
-
Senior Member
registered user
Is it true that the loader of win98 can also be configure to boot mulitple OS(well at least run different BAT files) somehow, through the change of config.sys ?
I think the easiest way is to use loadlin combining with this feature.
-
Hello Steven,
Set the "boot" option from your computers "BIOS", usually see "Press delete if you wish to enter setup", or some such on the black screen. It is not a Win 98 issue as said previously, set the machine to 1st boot device to your CD-Rom drive if able................
HTH
Will
Similar Threads
-
By tenlientl in forum Hardware & Booting
Replies: 0
Last Post: 04-30-2005, 06:45 AM
-
By mute1 in forum General Support
Replies: 5
Last Post: 03-11-2005, 08:46 PM
-
By truefate in forum General Support
Replies: 10
Last Post: 09-16-2004, 05:16 PM
-
By Blackavar in forum Networking
Replies: 7
Last Post: 02-03-2004, 12:41 AM
-
By Drago in forum General Support
Replies: 2
Last Post: 10-21-2003, 10:10 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Lot of 2 32GB DDR4 2666 PC4-21300 SODIMM RAM Modules Mixed Brand
$60.00
Kingston KCP424SD8/16 16GB DDR4 2400Mhz Memory RAM
$15.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 2x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$143.98