-
File copy gives error message "Success"
Hi all, Recently a motherboard in an old pc of mine toasted itself... It contained some important data, so I pulled out the HDD and put it in my good pc and booted Knoppix (the old one was running Debian, so I couldn't pull out the data with Windows *sigh*). However, when I try to copy my data to an USB HDD, I randomly keep getting the error message "Success" and then PCMan stops copying the files... It doesn't show up with every file and it doesn't even occur for the same file everytime. Quite a strange error message and I can't find any info related to it. This is no issue of having not enough space on my external HDD, because I have 971,9 GB left. That should be enough for 18GB of data, right? Could it have something to do with the fact that the HDD is (probably) NTFS formatted? Knoppix seems to be using FUSE for this, and I am totally unfamiliar with that system... Here is the line mount gives me for the external HDD:
Code:
/dev/sdf1 on /media/sdf1 type fuseblk (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000,allow_other,blksize=4096)
Thanks in advance, Eric Spreen
-
Originally Posted by
erispre
Hi all, Recently a motherboard in an old pc of mine toasted itself... It contained some important data, so I pulled out the HDD and put it in my good pc and booted Knoppix (the old one was running Debian, so I couldn't pull out the data with Windows *sigh*). However, when I try to copy my data to an USB HDD, I randomly keep getting the error message "Success" and then PCMan stops copying the files... It doesn't show up with every file and it doesn't even occur for the same file everytime. Quite a strange error message and I can't find any info related to it. This is no issue of having not enough space on my external HDD, because I have 971,9 GB left. That should be enough for 18GB of data, right? Could it have something to do with the fact that the HDD is (probably) NTFS formatted? Knoppix seems to be using FUSE for this, and I am totally unfamiliar with that system... Here is the line mount gives me for the external HDD:
Code:
/dev/sdf1 on /media/sdf1 type fuseblk (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000,allow_other,blksize=4096)
Thanks in advance, Eric Spreen
Two possibilities: 1) There's a problem with the old drive and/or filesystem; have you tried looking at it with GParted? It might tell you something useful. If it's NTFS, you can download a disk called "Hiten's BootCD", which will at least allow you to do a DOS chkdsk command.
2) There's something goofy with Pcman, and it can be done with a cp command in lxterm. You can Google for more on copying at the command line.
Hope that helps!
Krishna
-
Senior Member
registered user
@erispre
If you like to find out more about the filesystem's type on your USB HDD then you can use the blkid command.
Code:
sudo blkid /dev/sdf1
Do you use Knoppix 6.2.1? You could try GNU Midnight Commander mc instead of PCMan Filemanager.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00