Dummy needs to learn how to use subject line.
http://www.knoppix.net/forum/viewtopic.php?t=16574
First of all I'll clarify that I'm dumb when it comes to this. I am basically trying to boot to a knoppix cd with my usb plugged so that I can copy some documents off of a computer before I blow it out and reload the OS.
This system is a Compaq (1st problem) PIII866 with Windows 2000 (2nd problem).
I've looked all over at the documentation and forum for an answer to my question and have tried a couple of things but don't really know what I'm doing. I need some layman explaination, sorry
I boot and get the "You passed an undefined mode number" I have tried to let it find what it's looking for automatically and I have also hit return at which time it gives me a list. I tried all the numbered options in the list and none result in the screen I'm looking for (interface).
I did try "boot: knoppix vga=0 debug -b 3" and got through stage 1, 2, and it started 3 and ended at
INIT: Entering runlevel: 3
root@tty1[/]#
It still didn't help me and I'm not sure what that all meant. But like I said, this is all Greek to me
I boot up and it looks like it gets to "Starting X11" after this point the screen looks like it needs a horizontal hold adjustment and I never get to the interface or if it is there I can't see it.
I would appreciate any help I could get. Thanks
Dummy needs to learn how to use subject line.
http://www.knoppix.net/forum/viewtopic.php?t=16574
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Please fix your sbject line by editing the post.
Thecan be ignored. You can enter a zero "0" or just press enter."You passed an undefined mode number"
It sounds like knoppix is doing the best it can at autodetecting the video hardware (perhaps getting it wrong) & then setting a resolution & refresh rate that is beyond the capabilities of the hardware. Try booting knoppix with some Cheat Codes, such as:
knoppix screen=800x600 xvrefresh=60
knoppix screen=640x480 xvrefresh=60
I hope this helps.
James
Sorry Harry I corrected that thanks to help from Underscore. I will try putting in the cheat codes. I assume you type them in before you hit <Return> to start the boot.
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Dell R630 8SFF 2.4Ghz 12-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$430.04
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00
Yottamaster 4Bay RAID RGB Hard Drive Enclosure Type B Fr 2.5'' 3.5" SATA HDD SSD
$149.99