Try typing inknoppix xvrefresh=60 xmodule=ati screen=1024x768 at the boot screen then enter. You probably only need the xvrefresh=60 cheat code in the line and you can use a lower screen value if you want.
I am struggling to run knoppix on a machine that is my main linux box.
Its starts fine, goes as far as entering run level 5, then I see starting X11, then the screen goes blank and after a while the monitor goes on standby.
The CD and hard drive keep working so I guess its a video card / monitor issue.
The videocard is an onboard ATI 3D rage pro and the monitor a Mag 1595
This occurs with both knoppix 3.3 and knoppix 3.4-ct
I have installed RH 9 and SUSE 9 Pro on this machine before without a problem
I've looked in the FAQs and tried running as VGA=VESA and the other one recommended ( this is from memory so I could have got it the wrong way around)
Can any one point me in the right direction?
thanks a mil
:P
Try typing inknoppix xvrefresh=60 xmodule=ati screen=1024x768 at the boot screen then enter. You probably only need the xvrefresh=60 cheat code in the line and you can use a lower screen value if you want.
Stephen you are a star
the xvrefresh=60 did the trick
what was going wrong with the normal boot? and how did you pick that up?
thanks a mil
It is older hardware that monitor will not do the 72 hz refresh rate (IIRC) at 1024x768 that knoppix tries to use when it starts X. I have an old Acer here that was made around the same time as yours the best I can get it to use is 67 hz.Originally Posted by DinB
ok that explains it, intersting it was not an issue with RH or SUSE, but now I know
thanks again stephen
Never happened to me with Mandrake either, I have the same ATI card in that machine only Knoppix has a problem with the monitor if I put a more recent model of monitor there it works fine. Strangely enough Knoppix will do 1152x768/60hz on that monitor but no other distro will so go figure eh!Originally Posted by DinB
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$299.99
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2812.18
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$210.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
HP ProLiant ML350 Gen 9 Server 64GB RAM 2.4GHz Xeon 12-Core E5-2667 v3
$399.99
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00