-
Dial-up Modem and KNOPPIX v7.0.4 Live CD ...
Hello.
I got a booted KNOPPIX v7.0.4 Live CD to see an old Creative Modem Blaster V.92 USB (DE5671 Model) dial-up modem when I plugged it in during a session according to dmesg. I don't see to see any dial-up modem terminal programs like KPPP. Did KNOPPIX v7.0.4 get rid of dial-up modem softwares or am I doing this incorrectly? Or do I really need to use its DVD version?
Thank you in advance.
-
Senior Member
registered user
I think that the program wvdial could be used to establish a dial-up connection. You can find examples of a configuration file /etc/wvdial.conf on the internet. There is also a program wvdialconf. Don't forget to read the manual pages of wvdial and wvdialconf.
-
Originally Posted by
klaus2008
I think that the program wvdial could be used to establish a dial-up connection. You can find examples of a configuration file /etc/wvdial.conf on the internet. There is also a program wvdialconf. Don't forget to read the manual pages of wvdial and wvdialconf.
For now, I just want to see if KNOPPIX can communicate to this modem with its AT commands, but it doesn't seem to find the modem at all even though dmesg show detections:
root@Microknoppix:/home/knoppix# wvdial
--> WvDial: Internet dialer version 1.61
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
root@Microknoppix:/home/knoppix# wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3
ttyS4<Info>: No such device or address
Modem Port Scan<*1>: S4
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://alumnit.ca/wiki/?WvDial
# cat /etc/wvdial.conf
[Dialer Defaults]
Phone =
Username =
Password =
New PPPD = yes
I don't need to dial put yet.
# lsusb
Bus 004 Device 003: ID 148d:1671
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Shouldn't this modem be in lsusb results?
-
I also noticed if I boot KNOPPIX and Ubuntu v12.04.1 i386 live CDs with the modem connected, then their dmesgs doesn't show the modem at all. Unplugging and replugging will make dmesg show the modem for KNOPPIX, but Ubuntu doesn't identify the USB device at all.
-
Senior Member
registered user
Bus 004 Device 003: ID 148d:1671
lsusb found your modem.
If you search for the USB ID 148d:1671 you will find the page HSF (softmodem) driver.
It seems that you need some additional software to use your modem with Linux.
You could download the file hsfmodem_7.80.02.06full_i386.deb.zip from the download section, unzip the file and try to install it with
Code:
sudo dpkg -i hsfmodem_7.80.02.06full_i386.deb
But the install will fail because the source code is incompatible with the Linux kernel 3.4. You would have to search on the internet for patches.
-
Originally Posted by
klaus2008
lsusb found your modem.
If you search for the USB ID 148d:1671 you will find the page
HSF (softmodem) driver.
It seems that you need some additional software to use your modem with Linux.
You could download the file hsfmodem_7.80.02.06full_i386.deb.zip from the
download section, unzip the file and try to install it with
Code:
sudo dpkg -i hsfmodem_7.80.02.06full_i386.deb
But the install will fail because the source code is incompatible with the Linux kernel 3.4. You would have to search on the internet for patches.
I went to http://www.linuxant.com/drivers/hsf/...-installer.php to try it:
$ wget http://www.linuxant.com/drivers/dgc/...nxtinstall.run
$ sh ./cnxtinstall.run
Verifying archive integrity... All good.
Uncompressing Linux drivers for Conexant modem chipsets Installer version 1.0.3
If the graphical installer fails to start, you could try the terminal
version that you can start with the following command:
---
sh cnxtinstall.run -- --tty
---
Alternatively, you could manually download and install the packages from the
following pages:
HSF: http://www.linuxant.com/drivers/hsf/full/downloads.php
HCF: http://www.linuxant.com/drivers/hcf/full/downloads.php
DGC: http://www.linuxant.com/drivers/dgc/downloads.php
RIPTIDE: http://www.linuxant.com/drivers/riptide/downloads.php
ALSA driver: http://www.linuxant.com/alsa-driver
Trying to launch a web browser, please wait...
"A username and password are being requested by http://127.0.0.1:18021. The site says: 'Linux drivers for Conexant modem chipsets installation requires system privileges. Please enter root as username and the corresponding password'"
What's the login? I tried no password, but it rejected that. This looks like a pain in the butt process.
-
Senior Member
registered user
The address 127.0.0.1 is your system (localhost). I think you should issue and give the user root a password.
-
Originally Posted by
klaus2008
The address 127.0.0.1 is your system (localhost). I think you should issue
and give the user root a password.
Thanks! That worked. [sighs] This seems impossible. Here's a copy and paste of what I did in Terminal: http://pastebin.com/raw.php?i=876eEaki Maybe I should give up on this super old USB modem I got for free.
-
Senior Member
registered user
Predictive diagnostics for card in bus 004:
Modem chipset detected on
SLOT="Bus 004 Device 002:"
NAME=" "
bus=004
USBmodemID=148d:1671
IDENT=hsfmodem
Driver=hsfmodem
[...]
Primary device ID: 148d:1671
Support type needed or chipset: hsfmodem
[...]
Start at
http://www.linuxant.com/drivers/hsf/...ds-license.php to find the
hsfmodem package matching your System.
I would download the package hsfmodem_7.80.02.06full_i386.deb.zip from the download page to the desktop (/home/knoppix/Desktop).
Then I would download the patches hsfmodem-7.80.02.06-kernel-2.6.37.patch, hsfmodem-7.80.02.06-kernel-2.6.39.patch, hsfmodem-7.80.02.06-kernel-3.4.patch from the openmamba website and save them in /home/knoppix/Desktop.
In the terminal issue
Code:
cd /home/knoppix/Desktop
unzip hsfmodem_7.80.02.06full_i386.deb.zip
sudo dpkg -i hsfmodem_7.80.02.06full_i386.deb
The install will fail, but you can apply the patches you downloaded from the openmamba website.
Code:
cd /usr/lib/hsfmodem
sudo patch -p1 < /home/knoppix/Desktop/hsfmodem-7.80.02.06-kernel-2.6.37.patch
sudo patch -p2 < /home/knoppix/Desktop/hsfmodem-7.80.02.06-kernel-2.6.39.patch
sudo patch -p2 < /home/knoppix/Desktop/hsfmodem-7.80.02.06-kernel-3.4.patch
sudo dpkg-reconfigure hsfmodem
If necessary, run to complete the installation, enter license information, or to change your modem's configuration.
I hope that helps, but remember that you have to buy a licence key if you need the modem at full speed.
-
Originally Posted by
klaus2008
I would download the package
hsfmodem_7.80.02.06full_i386.deb.zip from the
download page to the desktop (/home/knoppix/Desktop).
Then I would download the patches
hsfmodem-7.80.02.06-kernel-2.6.37.patch,
hsfmodem-7.80.02.06-kernel-2.6.39.patch,
hsfmodem-7.80.02.06-kernel-3.4.patch from the openmamba website and save them in /home/knoppix/Desktop.
In the terminal issue
Code:
cd /home/knoppix/Desktop
unzip hsfmodem_7.80.02.06full_i386.deb.zip
sudo dpkg -i hsfmodem_7.80.02.06full_i386.deb
The install will fail, but you can apply the patches you downloaded from the openmamba website.
Code:
cd /usr/lib/hsfmodem
sudo patch -p1 < /home/knoppix/Desktop/hsfmodem-7.80.02.06-kernel-2.6.37.patch
sudo patch -p2 < /home/knoppix/Desktop/hsfmodem-7.80.02.06-kernel-2.6.39.patch
sudo patch -p2 < /home/knoppix/Desktop/hsfmodem-7.80.02.06-kernel-3.4.patch
sudo dpkg-reconfigure hsfmodem
If necessary, run
to complete the installation, enter license information, or to change your modem's configuration.
I hope that helps, but remember that you have to buy a licence key if you need the modem at full speed.
It seems to work. See my Terminal's copy and paste at http://pastebin.com/raw.php?i=YjLE4Sge ... Unfortunately, 14.4k data is for free and I have to pay for it for full package. Is this even legal for them do that? Is there another third party or is this it?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Lenovo M70q Gen 2 USFF Core i9-10900t - 8GB RAM - 128GB SSD - NO HDD
$295.55
2019-2020 Apple iMac 5K RETINA 4.6GHz 27" TURBO / 32GB RAM / 1TB SSD NVME
$1099.00
Dell OptiPlex 7050 SFF Core i7-7700 CPU 8GB DDR4 Ram 256GB M.2 SSD Win 11 Pro
$150.00
Dell OptiPlex 3060 MT Core i5 8th Gen 16GB Ram 480 GB SSD Windows 11 Computer
$239.00
NEW OEM Tray AMD Ryzen 7 5700X 8-Core 16-Thread 3.4GHz Socket AM4 CPU Processor
$149.00
Intel Xeon E5-2667 v2 SR19W 3.30GHz 25M 8GT/s 8-Core LGA2011 CPU Processor
$24.99
Apple Mac Pro Processor Tray 5,1 2010 2012 2.4ghz 8 core
$79.99
Intel Xeon E5-2667 V2 LGA 2011 3.3GHz 8 Core 130W 25MB 8GT/s CPU Processor
$24.00
HP Z2 Mini G5 i7-10700 8-Core 32GB 512GB SSD Win 11 Pro Wifi AC Adapter
$449.00
Dell OptiPlex 5060 SFF Desktop 256GB SSD 8th Gen i5-8500 3GHz 8GB RAM
$105.00