I mean, I remastered KNOPPIX 3.4 by doing apt-get -t unstable upgrade and dist-upgrade to the KNOPPIX 3.4 source directory. I wanted to get the newest stuff.Originally Posted by RemasteringNoob
I've just remastered a KNOPPIX 3.4 CD that I had upgraded to the latest unstable packages. When I try to boot from the CD, the X server starts up and I can see the KNOPPIX background but it instantly exits and returns to the shell prompt. When I run startx, the result is the same. The shell prompt shows the error message: "X-Window session terminated with errors. Please check and retry /etc/init.d/xsession start."
I mean, I remastered KNOPPIX 3.4 by doing apt-get -t unstable upgrade and dist-upgrade to the KNOPPIX 3.4 source directory. I wanted to get the newest stuff.Originally Posted by RemasteringNoob
Sounds like you installed new versions of very important configuration scripts when you did your upgrade ...
kelmo is probably right, you have probably upgraded Knoppix configuration scripts out of existance. Now, what to do about it?Originally Posted by RemasteringNoob
1) Re-install & upgrade more conservatively?
2) Try to figure out which config scripts are causing problems & renew them from the original CD?
Can you boot your remaster while still installed on the CD? ie is it a true HD install? or just a copy to chroot into? If you can boot into it, does it run OK? Maybe you can track down the problem script this way.
I realize this is not much help. Sorry. I've burned myself a couple of times with 'apt-get upgrade' & 'dist-upgrade', now I only upgrade bits & pieces as need arises.
My remaster ISO sits in /dev/hda1/knoppix.iso and I boot knoppix from the CD using: knoppix bootfrom=/dev/hda1/knoppix.iso. I guess I'll have to do #2 above. Some script that startx or xinit calls is causing the X server to go away quickly. When I run the X server by itself (type X :0), it runs and it stays running.
hi,
do you mean :
"knoppix bootfrom=/dev/hda1/knoppix.iso "
that you can boot as if you had a virtual_cd_reader ?
That sounds interesting ,since I looked around for booting off
a "loopback_file" and never got answer.
Where do you find that ?
Maybe ~/.xsession-errors will tell you something but ATM I'm not even sure if that file is there or not.Originally Posted by RemasteringNoob
hi RemasterinNoob,Originally Posted by RemasteringNoob
I misundertood you (reason : the extension iso ).In fact ,your
"bootfrom=/dev/hda1/knoppix.iso" means your intention is to tell the booting process that your KNOPPIX_image is lying on hdd_hda1.If you read linuxrc (inside miniroot.gz or similar ramdisk_stuff)there is one line
case "$CMDLINE" in *fromhd=/dev/*) DEVICES="$fromhd" ; ;; esac
this means,if your original intention was as stated,you have to put instead-on cmdline
fromhd=/dev/hda1 only to say your image is sitting on hda1
and of course you need to have a directory named KNOPPIX,and containg a big file KNOPPIX
Yes, I got it from the Cheat Sheet .Originally Posted by wangji
oh,you just miss me,look at my post jul 22 just before yours !Originally Posted by RemasteringNoob
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$78.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$112.00
Seagate EXOS X16 16TB 256MB 7200rpm 3.5" SATA 6Gb/s Enterprise HDD ST16000NM001G
$139.99
Western Digital WD60PURZ 6TB Hard Drive SATA6 Gb/s 64MB Cache 3.5 Inch
$109.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HP 4TB 3.5" 12Gb/s 7.2K SAS Hard Drive P/N: 793674-001 / 803634-001 / 695597-004
$14.87
Western Digital WD5000LPLX 500GB 2.5" SATA 32MB 6Gb/s 7200RPM Laptop Hard Drive
$7.99
WD HDD Ultrastar DC HC520 HUH721212AL4205 12TB 3.5" SAS Server Hard Disk Drive
$45.32
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99