Have you tried this? Knoppix menu> Network/Internet> Network Card Configuration
Hi all;
Newby to Linux and Knoppix here - firstly, my apologies for lack of any Linux knowlwdge! (I do run a few ported Linux progs though, Lyx, Mozilla etc.)
Anyway - I've just found Knoppix on CD and have had a bit of a play. So far so good.....however;
1. I cannot connect to my LAN - DHCP does not pick up any IP addy. In Windoze i just select "obtain an IP address automatically" and it does.
2. I see that Lyx 1.3.4 is shipped with the Knoppix CD and would like to give it a go. Question is how does one "run" a program that does not appear(AFIK) on the start menu?
Have you tried this? Knoppix menu> Network/Internet> Network Card Configuration
Yep; I tried to manually configure with known IP, Gateway etc but still no joy
I've sorted it - of sorts
I have an on board LAN card that I use for a interanl home network and a PCI Netgear FA311 card which I use for external network connection
Knoppix + FA311 = No connection
Knoppix + onboard = All works fine
No idea why but I'm happy
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
CSE-118 Supermicro 1U 3x GPU Server 2.6Ghz 20-C 128GB CX353A 2x1600W PSU Rails
$454.03
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HYVE ZEUS V1 1U BAREBONE SERVER 2X10CORE E5-2680V2 2.8GHz 16GB RAM RISER NO RAIL
$180.00
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00