Easiest way: do a 'poorman's install' of the stock Knoppix from the CD then replace the 'KNOPPIX' file in the poorman's with your customized 'KNOPPIX' file.
Hi guys
I'd like to test my customized Knoppix without burning it .
How can I do it?
I've just read that I've to make a boot floppy with:
dd if=boot.img of=/dev/floppy
but I'm using Knoppix 3.6 and I've not the file boot.img.
How can I make this boot floppy?
thank you very much
claudio
Easiest way: do a 'poorman's install' of the stock Knoppix from the CD then replace the 'KNOPPIX' file in the poorman's with your customized 'KNOPPIX' file.
Let's say your new image is new-knoppix.isoI'd like to test my customized Knoppix without burning it .Look through /test-new to make sure everything is there and in the right place.
- # mkdir /test-new
# mount -t iso9660 -o ro,loop new-knoppix.iso /test-newYou can also do a test run with your burner. For example,
- # umount /test-new
using your own dev= (which you can find with # cdrecord -scanbus). The -v option tells it to be verbose (describe what it's doing) and -dummy says to not turn on the laser.
- # cdrecord -v -dummy dev=0,0,0 new-knoppix.iso
If you get buffer underrun errors, you can try again with a slower speed or with the burnfree option set, if it's available in your burner and drive.Enjoy!
- # cdrecord -v -dummy -driveropts=burnfree speed=8 dev=0,0,0 new-knoppix.iso
-- Ed
Thank you very much
I'll try a poorman's install.
I didn't think to this simple solution
The simplest solution is the best too.
Then I'll try "cdrecord -v -dummy..." before burning it.
Thank you both very much
claudio
Juniper SRX650 VPN Firewall Security Hub SRX650-BASE-SRE6-645AP w/SRX-GP-IM
$99.99
JUNIPER MPC5E-40G10G MPC5E CARD 6x40GE & 24x10GE, COUIBD1BAF
$3999.99
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.18
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper EX2300-24P POE+ Switch 24 x 1GbE & 4 SFP+ 10G uplinks W/RACK EARS 370W
$170.10
Juniper QFX5100-48T-AFO 48 100M/1G/10G Base-T 6 QSFP AFO
$485.00
Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested
$289.00