The drivers and information for atmel based wireless cards (pci, pcmcia & usb) can be found here http://atmelwlandriver.sourceforge.net
I got the 01-01-2003 release of Knoppix. I have got an "EpoX EWL-C100" (ATMEL/RFMD based Wireless Network PC-Card) and remastered Knoppix with the newest drivers. Everything works quite fine, but if I plug in the card the modules don't load, because it says:
module was built for kernel 2.4.19 this kernel is 2.4.20-xfs: can't load
I also got the sources for kernel 2.4.20 and patched it with xfs-support and the knoppix-patch.
I compiled the drivers again, but the problem is still the same.
Does anybody know how to solve it?
Thanks, seyring
The drivers and information for atmel based wireless cards (pci, pcmcia & usb) can be found here http://atmelwlandriver.sourceforge.net
Hi there,
I am also hoping that Atmel-cards are supported in 3.2 !!!! Just a few days (I hope)..........
Patrick
Originally Posted by patmad
same here, need wireless support and the update with the config save ability to multiple devices
bad luck,
the dlink dwl-120 is still not supported in KNOPPIX_V3.2-2003-03-21b-EN.
ATMEL AT76C503A based usb devices:
15 DLink DWL-120 MXF-WL280 0x03eb 0x7603 AT76C503A 3861 Yes Yes yes.
the card is not recognized yet
Originally Posted by sjoerd
NEW UPDATE!
CROSSING MY FINGERS THIS ONE HAS ATMEL!!
* V3.2-2003-03-23 (small updates)
- new PCMCIA wireless card entries
- wavelan-ng-modules is back (forgot that in the previous release)
- removed some older/unneeded gnome libraries
- kdevelop seems to create KDE applications again after updating
some KDE-packages from unstable.
If someone is able to download and check this before I do, please reply here and let me and others know if it has ATMEL one way or the other.
Alas, my pcmcia-Atmel card (502A-D) is not supported in KNOPPIX_V3.2-2003-03-30-EN....
Has anyone yet succeeded in getting these wlan-cards working?
patrick
Hi, I'm still trying to get my ATMEL AT76C502AR_D wireless card working.
I got it so far that it is recognized when plugged in
root@knoppix-box:~# dump_cis
Socket 0:
attr_dev_info
fn_specific 250ns, 2kb
manfid 0x0000, 0x0000
funcid network_adapter
vers_1 5.0, "ATMEL", "AT76C502AR_D"
config base 0x0800 mask 0x0001 last_index 0x02
cftable_entry 0x01 [default]
[mwait] [pwrdown]
Vcc Vnom 3300mV Iavg 250mA Ipeak 250mA Idown 25mA
timing wait 12us
io 0x0000-0x001f [lines=5] [16bit]
irq mask 0xffb8
root@knoppix-box:~#
but when installing it I get these messages
As you can see it is not working...Code:root@knoppix-box:~/atmelwlandriver# make config Build all (y/n) : n Kernel Version Running 2.4.20-xfs Found Kernel Source Directory () Build Debug version (y/n) : y Set extra module version information (y/n) : y Build USB Drivers (y/n) : n Build PCMCIA Drivers (y/n) : y Build PCMCIA rfmd Driver (y/n) : y Build PCMCIA 3COM Driver (y/n) : n Build PCMCIA rfmd revision d Driver (y/n) : y Build PCMCIA rfmd revision e Driver (y/n) : n Build PCMCIA 504 Driver (y/n) : n Build miniPCI Driver (y/n) : n Build applications (y/n) : y Build command line application (y/n) : y You have to install the xforms library in order to use the xvnet application Finished. Now run make clean, all, install root@knoppix-box:~/atmelwlandriver# make clean find -name '*.o' -o -name '*.map' |xargs rm -f root@knoppix-box:~/atmelwlandriver# make all Building src/Pcmcia_Pci src/apps/cmd_line make[1]: Entering directory `/root/atmelwlandriver/src/Pcmcia_Pci' PCMCIA yes : rfmdD revdD for i in rfmdD revdD; do make $i; done make[2]: Entering directory `/root/atmelwlandriver/src/Pcmcia_Pci' make clean make[3]: Entering directory `/root/atmelwlandriver/src/Pcmcia_Pci' find -name '*.o'|xargs rm -f make[3]: Leaving directory `/root/atmelwlandriver/src/Pcmcia_Pci' DEBUGORNO=debug.o make final CFLAGS:='-I/pcmcia/include -DLINUX_OS -D__KERNEL__ -pipe -O3 -fomit-frame-pointer -fno-strict-aliasing -I/include -I/root/atmelwlandriver/src/includes -I/root/atmelwlandriver/src/includes/pcmcia -Wall -DMODULE -DMODVERSIONS -include /include/linux/modversions.h -DRFMD -DINT_ROAM -DRX_CRC -DPCMCIA_DEBUG=1' MODULE:='pcmf502r.o' LIB:=-RFMD- DEBUGORNO:=debug.o make[3]: Entering directory `/root/atmelwlandriver/src/Pcmcia_Pci' gcc -I/pcmcia/include -DLINUX_OS -D__KERNEL__ -pipe -O3 -fomit-frame-pointer -fno-strict-aliasing -I/include -I/root/atmelwlandriver/src/includes -I/root/atmelwlandriver/src/includes/pcmcia -Wall -DMODULE -DMODVERSIONS -include /include/linux/modversions.h -DRFMD -DINT_ROAM -DRX_CRC -DPCMCIA_DEBUG=1 -c -o card.o card.c card.c: /include/linux/modversions.h: No such file or directory In file included from /root/atmelwlandriver/src/includes/pcmcia/vnet.h:28, from card.c:23: /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:56:28: pcmcia/version.h: No such file or directory /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:57:29: pcmcia/cs_types.h: No such file or directory /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:58:23: pcmcia/cs.h: No such file or directory /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:59:27: pcmcia/cistpl.h: No such file or directory /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:60:27: pcmcia/cisreg.h: No such file or directory /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:61:23: pcmcia/ds.h: No such file or directory /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:86:31: linux/modversions.h: No such file or directory make[3]: *** [card.o] Error 1 make[3]: Leaving directory `/root/atmelwlandriver/src/Pcmcia_Pci' make[2]: *** [rfmdD] Error 2 make[2]: Leaving directory `/root/atmelwlandriver/src/Pcmcia_Pci' make[2]: Entering directory `/root/atmelwlandriver/src/Pcmcia_Pci' make clean make[3]: Entering directory `/root/atmelwlandriver/src/Pcmcia_Pci' find -name '*.o'|xargs rm -f make[3]: Leaving directory `/root/atmelwlandriver/src/Pcmcia_Pci' make final CFLAGS:='-I/pcmcia/include -DLINUX_OS -D__KERNEL__ -pipe -O3 -fomit-frame-pointer -fno-strict-aliasing -I/include -I/root/atmelwlandriver/src/includes -I/root/atmelwlandriver/src/includes/pcmcia -Wall -DMODULE -DMODVERSIONS -include /include/linux/modversions.h -DPCMCIA_DEBUG=1 -DRFMD -DINT_ROAM -DRX_CRC -DREV_D' RF:='0' DBG:='1' MODULE:='pcmf502rd.o' LIB:=-REVD- DEBUGORNO:=debug.o make[3]: Entering directory `/root/atmelwlandriver/src/Pcmcia_Pci' gcc -I/pcmcia/include -DLINUX_OS -D__KERNEL__ -pipe -O3 -fomit-frame-pointer -fno-strict-aliasing -I/include -I/root/atmelwlandriver/src/includes -I/root/atmelwlandriver/src/includes/pcmcia -Wall -DMODULE -DMODVERSIONS -include /include/linux/modversions.h -DPCMCIA_DEBUG=1 -DRFMD -DINT_ROAM -DRX_CRC -DREV_D -c -o card.o card.c card.c: /include/linux/modversions.h: No such file or directory In file included from /root/atmelwlandriver/src/includes/pcmcia/vnet.h:28, from card.c:23: /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:56:28: pcmcia/version.h: No such file or directory /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:57:29: pcmcia/cs_types.h: No such file or directory /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:58:23: pcmcia/cs.h: No such file or directory /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:59:27: pcmcia/cistpl.h: No such file or directory /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:60:27: pcmcia/cisreg.h: No such file or directory /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:61:23: pcmcia/ds.h: No such file or directory /root/atmelwlandriver/src/includes/pcmcia/vnet_linux.h:86:31: linux/modversions.h: No such file or directory make[3]: *** [card.o] Error 1 make[3]: Leaving directory `/root/atmelwlandriver/src/Pcmcia_Pci' make[2]: *** [revdD] Error 2 make[2]: Leaving directory `/root/atmelwlandriver/src/Pcmcia_Pci' make[1]: *** [all] Error 2 make[1]: Leaving directory `/root/atmelwlandriver/src/Pcmcia_Pci' make[1]: Entering directory `/root/atmelwlandriver/src/apps/cmd_line' gcc -DATMEL -O2 -g -I/root/atmelwlandriver/src/includes -o lvnet -lncurses cofvnet.c sets.c bootcnf.c make[1]: Leaving directory `/root/atmelwlandriver/src/apps/cmd_line' root@knoppix-box:~/atmelwlandriver# make install set -x depmod -aq OK root@knoppix-box:~/atmelwlandriver# ifconfig eth0 Link encap:Ethernet HWaddr 00:50:EB:02:20:94 inet addr:192.168.0.8 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:104240 errors:0 dropped:0 overruns:0 frame:0 TX packets:75258 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:152516226 (145.4 MiB) TX bytes:5326221 (5.0 MiB) Interrupt:10 Base address:0x4800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:64 errors:0 dropped:0 overruns:0 frame:0 TX packets:64 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4112 (4.0 KiB) TX bytes:4112 (4.0 KiB)
Has anyone any idea how to fix it? I'm quite a newbie on this, but I'd really like to have it working!
Thanx
Patrick
Originally Posted by patmadThis is where it goes wrong. You really need to have the kernel sources available with the Atmel driver stuff. Otherwise, it gets confused and can't find any of the headers. I think that the configuration scripts look in /usr/src/linux by default, and when I've done the build on various other distributions, it has successfully located kernel sources in that location.Originally Posted by patmad
It really would be nice if it worked "out of the box" with Knoppix, yes.Originally Posted by patmad
Thanks for replying!
I already thought this could be the problem, so I downloaded the kernel-source-2.4.20-xfs and put it in /usr/src/
Then I edited .config and pointed the KERNEL_SRC to this map.
But when I do make install it still shows
Build all (y/n) : n
Kernel Version Running 2.4.20-xfs
Found Kernel Source Directory ()
and later on I still can see some errors during make all that some file or folder is nowhere to be found.......
How can I make these sources to be recognized? Do I have to compile the kernel?
Thanks for helping me making this card work properly!!!
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module
$349.97
Cisco STACK-T4-3M Stacking Cable New Sealed
$149.00
NEW Cisco Catalyst C9300-NM-8X 10G 8-Port Network Switch Module (BHN)
$539.96
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$89.00
Cisco WIC-1AM-V2 1-Port Analog V.92 Modem WAN Interface Card - 1 Year Warranty
$5.95
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850
$144.32
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco Catalyst 2960-X WS-C2960X-48FPD-L 48 Port GigE PoE 2x 10G SFP+ Switch
$99.99
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch
$449.00