-
Knoppix 3.3 hangs inserting a PCMCIA Compact Flash
I dont know if this is the right forum for my problem.
Feel free to redirect me to the correct one.
I have a MSI Hermes-651P desktop computer
http://www.msi.com.tw/program/produc...il.php?UID=418
with a PCMCIA slot.
I use a Knoppix 3.3 (19 nov 2003) both from CDROM,
and from HD (the system is working without glitches
with Slackware, Mandrake,RedHat and Window$ XP too).
Running Knoppix, inserting a 64 MB Compact Flash into slot 0, the machine hang.
The /var/log/messages follows:
-----------------------------------------------------------------
---- This are the messages for embedded IDE controllers
-----------------------------------------------------------------
Dec 8 14:00:55 andrewh3 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 8 14:00:55 andrewh3 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Dec 8 14:00:55 andrewh3 kernel: hda: attached ide-disk driver.
Dec 8 14:00:55 andrewh3 kernel: hda: host protected area => 1
Dec 8 14:00:55 andrewh3 kernel: hda: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=9732/255/63
Dec 8 14:00:55 andrewh3 kernel: ide-cd: passing drive hdc to ide-scsi emulation.
Dec 8 14:00:55 andrewh3 kernel: hdc: attached ide-scsi driver.
Dec 8 14:00:55 andrewh3 kernel: Partition check:
Dec 8 14:00:55 andrewh3 kernel: hda: hda1 hda2 < hda5 hda6 hda7 > hda4
Dec 8 14:00:55 andrewh3 kernel: ide: late registration of driver.
...
...
...
--- Insert the PCMCIA card
Dec 8 14:02:13 andrewh3 kernel: hde: SanDisk SDCFB-64, CFA DISK drive
Dec 8 14:02:13 andrewh3 kernel: ide2 at 0x100-0x107,0x10e on irq 7
Dec 8 14:02:13 andrewh3 kernel: hde: attached ide-disk driver.
--- System hangs -----
Note that on same system RedHat 8.0 is able to get the card
inserted:
Dec 8 14:25:26 andrewh2 kernel: hde: SanDisk SDCFB-64, ATA DISK drive
Dec 8 14:25:26 andrewh2 kernel: ide2 at 0x100-0x107,0x10e on irq 9
Dec 8 14:25:26 andrewh2 kernel: ide-floppy driver 0.99.newide
Dec 8 14:25:26 andrewh2 kernel: hde: 125440 sectors (64 MB) w/1KiB Cache, CHS=490/8/32
Dec 8 14:25:26 andrewh2 kernel: hde: hde1
Dec 8 14:25:26 andrewh2 kernel: ide_cs: hde: Vcc = 3.3, Vpp = 0.0
Dec 8 14:25:26 andrewh2 cardmgr[604]: executing: './ide start hde'
...
---- Is now possible to mount the file system on the card
Last, the same card is working without problems on a IBM laptop
with the same Knoppix 3.3 bootstraped from CDROM.
Any suggestions ?
Thanks in advance
*am*
-
Senior Member
registered user
Re: Knoppix 3.3 hangs inserting a PCMCIA Compact Flash
Originally Posted by
amontefusco
--- Insert the PCMCIA card
Dec 8 14:02:13 andrewh3 kernel: hde: SanDisk SDCFB-64, CFA DISK drive
Dec 8 14:02:13 andrewh3 kernel: ide2 at 0x100-0x107,0x10e on irq 7
Dec 8 14:02:13 andrewh3 kernel: hde: attached ide-disk driver.
--- System hangs -----
It is getting attached to the ide-disk driver instead of the ide_cs that the redhat install is using below.
Dec 8 14:25:26 andrewh2 kernel: ide_cs: hde: Vcc = 3.3, Vpp = 0.0
Now if the ide-disk driver works like the ide-cd driver and you can pass the option to tell it to ignore say a hdc which is a burner and you want it to use the ide-scsi instead of ide-cd so you can burn then you should be able to create a file in /etc/modutils/ and have the contents put into the /etc/modules.conf to have the option used at boot.
To do this create a file say pcmciafix in the directory /etc/modutils with these contents:
Code:
## Added by me to fix pcmcia being detected incorrectly as ide-disk
options ide-disk ignore=hde
Then you would run update-modules to update the /etc/modules.conf with the changes to be used for the next boot. Now this is just a shot in the dark with me assuming that the ide-disk works the same as the ide-cd driver I have never tried it so I'm not sure it will work, all of this done as root.
A last thought it may be as simple as modifying the append line in the /etc/lilo.conf and instead of there being a hde=scsi make it hde=ide-cs and then run /sbin/lilo -v to update lilo with the changes and have them used on next boot this done as root also, now this one is totally a guess. Anyways the problem is the ide-disk taking over the card when inserted instead of ide-cs so if these suggestions do not work that is where you need to start searching for the cause of the problem.
-
Re: Knoppix 3.3 hangs inserting a PCMCIA Compact Flash
Originally Posted by
Stephen
Now if the ide-disk driver works like the ide-cd driver and you can pass the option to tell it to ignore say a hdc which is a burner and you want it to use the ide-scsi instead of ide-cd so you can burn then you should be able to create a file in /etc/modutils/ and have the contents put into the /etc/modules.conf to have the option used at boot.
To do this create a file say pcmciafix in the directory /etc/modutils with these contents:
Code:
## Added by me to fix pcmcia being detected incorrectly as ide-disk
options ide-disk ignore=hde
Then you would run
update-modules to update the /etc/modules.conf with the changes to be used for the next boot. Now this is just a shot in the dark with me assuming that the ide-disk works the same as the ide-cd driver I have never tried it so I'm not sure it will work, all of this done as root.
A last thought it may be as simple as modifying the append line in the /etc/lilo.conf and instead of there being a
hde=scsi make it
hde=ide-cs and then run
/sbin/lilo -v to update lilo with the changes and have them used on next boot this done as root also, now this one is totally a guess. Anyways the problem is the ide-disk taking over the card when inserted instead of ide-cs so if these suggestions do not work that is where you need to start searching for the cause of the problem.
I did it
cat /proc/cmdline
BOOT_IMAGE=Linux ro root=304 hda=scsi hdb=scsi hdc=scsi hde=ide-cs apm=power-off nomce
but without luck.
Inserting the card I got again
Code:
Dec 8 21:53:51 andrewh3 cardmgr[276]: initializing socket 0
Dec 8 21:53:51 andrewh3 cardmgr[276]: socket 0: ATA/IDE Fixed Disk
Dec 8 21:53:51 andrewh3 cardmgr[276]: product info: "SunDisk", "SDP", "5/3 0.6"
Dec 8 21:53:51 andrewh3 cardmgr[276]: manfid: 0x0045, 0x0401 function: 4 (fixed disk)
Dec 8 21:53:51 andrewh3 cardmgr[276]: executing: 'modprobe ide-cs'
Dec 8 21:53:53 andrewh3 kernel: hde: SanDisk SDCFB-64, CFA DISK drive
Dec 8 21:53:53 andrewh3 kernel: ide2 at 0x100-0x107,0x10e on irq 7
Dec 8 21:53:53 andrewh3 kernel: hde: attached ide-disk driver.
the cardmgr is loading the correct module ide-cs but, as you pointed out,
the ide-disk prevails.
*am*
-
Senior Member
registered user
You do not mention if you tried the the option ignore file have you? Other than that I think I am out of ideas.
-
Originally Posted by
Stephen
You do not mention if you tried the the option ignore file have you? Other than that I think I am out of ideas.
Yes, I tried but without changes on the error pattern.
*am*
Similar Threads
-
By monckywrench in forum Ideas
Replies: 4
Last Post: 04-20-2005, 06:46 PM
-
By Randy in forum Hardware & Booting
Replies: 2
Last Post: 02-03-2005, 09:48 PM
-
By drews in forum Customising & Remastering
Replies: 3
Last Post: 08-30-2004, 05:20 PM
-
By knewbex in forum Hardware & Booting
Replies: 0
Last Post: 06-09-2004, 02:00 AM
-
By diablo266 in forum General Support
Replies: 1
Last Post: 03-28-2004, 05:05 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Dell HBA330 12GBPS SAS Internal HBA Controller (NON-RAID) PCIe Card J7TNV 0J7TNV
$40.05
LSI SAS 9300-8i 8-Port PCIe SAS Non-RAID Host Bus Adapter 12GBPS AOC-S3008L-L8e
$58.40
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
Lenovo 930-16i PCIe SAS RAID Controller FRU P/N: 01KN508 Tested Working
$149.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99