-
scanner not working after hdd install
i have a benq 3300 scanner wich was working very well when i booted knoppix of the cd.But now i installed knoppix to the hdd and the scanner doesnt work anymore.
In the start of the aplication Kooka the scanner is listed, i choosed the scaner and then it tells me: Problem: No scanner was found
You system does not provide a SANE instalation, wich is required by the KDE scan support.
Also any help in getting a HP 7200 parallel port CDWriter working would also be apreciated.i could get it to work with SuSE but as i'm new to debian this is being dificult. i tried to modprobe pg pcd and epat but when i do 'cdrecord --scanbus' i only see the other drives.
Thanks in advance for any help
Also forgive my bad english, i'm portuguese
Mauro
-
This is the same problem I recently had with my CDRW. You will have to reinstall Knoppix. This time before you install use your scanner. The prblem is that the hdinstall script simply copies your current set up at the time. So if you havn't used the scanner before you installed you will get no scanner abilities in the install.
Hope that works
-
Scanner already works!!
i did just like you said and now the scanners works, great tip thanx.
the problem with the parallel cdrw i'm not sure but i think my cdrw is broken or somehing, a load all the necessary modules put a cd in the drive but always with the same result: no medium found.gotta test it in windows.
I have another problem in kde, i putted icons on the desktop to mount the cdrom's and de win partitions, but when i try to mount it says mount point doesn't exist, i checked and the mount points are there. but i righ click and choose mount the drvie get's mounted wih no problem.i'm going nuts with this one, anyone can help??
Thanx
Mauro
-
Senior Member
registered user
Re: Scanner already works!!
Originally Posted by
mgomes
I have another problem in kde, i putted icons on the desktop to mount the cdrom's and de win partitions, but when i try to mount it says mount point doesn't exist, i checked and the mount points are there. but i righ click and choose mount the drvie get's mounted wih no problem.i'm going nuts with this one, anyone can help??
There are multiple options, what I did:
Open KDE controlpanel -> Desktop (2nd in list) -> Settings (1st in sublist)
Now check "show devices on desktop" and check the appropriate device types from the list.
I don't run KDE in english so I hope my translation is somewhat right you find out where to look.
-
that worked but....
the icons disapear when they are mounted and reapear again when unmounted and it gets a bit confusing, and i couldn't change the names. in know that in KDE it's possible just to create a new link and change the properties so that it mounts the device when i click it, but it's not working and i can't figure out why.is there any way i can get this to work? it's suposed to (in SuSE i can do that) but it's not working.
thanx
Mauro
-
update
figured out the disapearing stuff, just lack of atention i did not have the proper checkboxes checked but it puts all my partitions on the desktop and i would like to put only the ones the i want.
Similar Threads
-
By mco in forum Hdd Install / Debian / Apt
Replies: 10
Last Post: 12-27-2004, 03:27 AM
-
By BaltikaTroika in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 09-27-2004, 01:33 PM
-
By rrfish72 in forum General Support
Replies: 4
Last Post: 09-17-2004, 04:22 PM
-
By torque2k in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 11-06-2003, 10:40 PM
-
By Mogiin in forum Hardware & Booting
Replies: 5
Last Post: 10-17-2003, 07:05 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
WD HDD Ultrastar DC HC520 HUH721212AL4205 12TB 3.5" SAS Server Hard Disk Drive
$45.36
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$28.53
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$209.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
HP 4TB 3.5" 12Gb/s 7.2K SAS Hard Drive P/N: 793674-001 / 803634-001 / 695597-004
$13.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$78.99
Seagate Exos X14 12TB SATA6Gb/s 7200RPM 3.5" Enterprise Hard Drive ST12000NM0558
$109.95
HDD 3.5" SATA Hard Drive with Windows 7/Win 10 Installed Legacy
$35.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$44.63