Why not read- and writable? I suppose you are using a "poor man's install.
First I boot knoppix as:
then I seeknoppix64 init 2 no3d fromhd="/dev/sdc5"
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
Why not read- and writable? I suppose you are using a "poor man's install.
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
Fortinet FortiGate-40C Network Security Firewall
$42.50
NetFu Firewall 1U, Intel CPU, 8 x Gigabit, SFP, w/ pfSense, Others, NEW OPTIONS
$541.85
NEW NetFu Firewall Mini, Intel CPU, 6 Port Gigabit, w/ pfSense, others
$336.00
Palo Alto PA-220 Security Appliance Firewall - NO Power adapter -
$33.00
Netgate SG-3100 Network Security Appliance PfSense Plus Multi Wan Firewall
$189.00
Palo Alto PA-500 8-Port Network Security Firewall Appliance -
$29.50
Fortinet Fortiwifi 60D FG-60D Security Appliance Firewall / VPN w/ AC Adapter
$34.97
Cisco ASA5506-K9 ASA 5506-X Network Security Firewall
$49.99
Genuine Fortinet FortiGate 60E-POE Firewall Network Security ATP Bundle 2 years
$263.99
Cisco Meraki MX68 Cloud Managed Security Appliance Unclaimed w/ Power Adapter
$157.95