in begining of boot process you see everyting stopping for a fe seconds and the line
boot:
appears, just type knoppix fb800x600 there, or knoppix26 fb800x600
diference being that thew added 26 gives a 2.6 kernel (more current) than the knoppix only.
Hi all,
I'm having problems installing knoppix 3.6 I wondered if any of you experts could help me out.
I'm trying on 2 different machines and both seem to be failing on Graphic Card drivers.
My first machine (using Matrox millenium G400 dualhead) boots up fine except that when the screen appears it's unreadable. I can just about make out the penguin! I've tried a few times, adjusting monitor mode and either get the same or
NO SUITABLE X-SERVER found for your card
...the same error as on my other machine (using NVIDIA riva tnt2/tnt2 pro)!!
The help on the disc has a couple of suggestions about entering KNOPPIX XMODULE or fb800X600. Where exactly do I enter these?!!
Any help would be much appreciated.
Cheers,
Adrian
in begining of boot process you see everyting stopping for a fe seconds and the line
boot:
appears, just type knoppix fb800x600 there, or knoppix26 fb800x600
diference being that thew added 26 gives a 2.6 kernel (more current) than the knoppix only.
Thanks. I'm having another go tonight... I may be back!!
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Blade Server
$539.95
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99