FWIW, no significant delay in normal (not pxe) use of dhcp.
Im booting Knoppix 6.7 via pxe. Once Knoppix starts to load I get delay in DHCP during boot. The sending dhcp message appears for quiet some time. Then knoppix goes about its boot. The unit has an ip from the pxe process. So my question is, is this a knoppix delay or my pxe server? Any ideas?
Thanks!
FWIW, no significant delay in normal (not pxe) use of dhcp.
So called normal use of DHCP within Knoppix doesnt begin until after X has started/loaded. Knoppix needs IP before X when pxe booting. I think it may be within minirt.gz the ini file itself. ?
I've contributed all I know for sure on this.
But if pxe needs IP early, why isn't the server providing it already?
Are you able to decode minirt.gz and read the init?
Yes, Ive just started to dig thru ini. I think DHCP server is confused by knoppix asking for an ip from the same mac addy that just requested ip?
FWIW,
In 6.4.4 my LiveUSB took almost 120 seconds to get on-line initially.
I finally disabled Network Manager and got down to about 55-or so seconds
using a primitive /etc/rc.local routine to get my wifi going.
In 6.7, there was no similar slow start to getting on-line in less than
a minute and no need to circumvent Network Manager.
Obviously either Knoppix or Network Manager must have changed between
6.4.4 and 6.7. If you don't find the answer in minirt.gz, then you might
see if there's some difference in NM that explains your situation.
Thanks for those ideas. I will post my findings. May take me a few days.
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Gen9 Blade 2x E5-2680v3 2.5GHz =24 Cores 256GB P246 650FLB
$430.00
Dell PowerEdge M620 Blade Server
$39.99