-
Knoppix 4.0 DVD HDD Install issue
Hi Guys,
I am a Linux Beginner and had various installations of knoppix and kanotix on my machine before.
After a while my latest Installation did not work any more so I decided to install Knoppix 4.0 on a new 20GB Hdd.
I made a 18GB Linux and a 2GB Linux swap and Knoppix installs everything without a Problem.
On a reboot from HDD I get this:
Uncompressing Linux... Ok, booting Kernel
and then
Kernel Panic - not syncing: VFS : Unable to mount roof fs on unknown-block(3,1)
The PC is a Fujitsu 700mHz with 256 MB Ram
-
I have excatly the same problem and cannot figure it out. I have tried all different ways and one time it did boot but could not find my ethernet connection. I am mostly using Mephis and debian and have no problems. The Knoppix live DVD works great but I cannot install it to the hard drive without the kernel painc happening. I have tried it on 2 different systems. I use sudo knoppix-installer.
-
Boot from the CD, mount the partition that holds the Knoppix install and post the contents of the file /boot/grub/menu.lst (from the mounted partition, not otherwise). Most likely the entry in the configuration file points to the wrong partition.
-
I had the same problem.
Try this.....It worked for me ....... I noticed that the boot sequence tried to detect my dvdrw as a hardrive and could not synchronize with it. I just changed the bios for my dvdrw to auto and removed the secondary slave hard drive.
-
# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
# Pretty colours
color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specifiv kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
# kopt=root=/dev/hda1 ro ### isk_size=100000 init=/etc/init lang=us apm=power-off nomce quiet vga=791
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=false
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery mode) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## ## End Default Options ##
title Debian GNU/Linux, kernel 2.6.12 Default
root (hd0,0)
kernel /boot/vmlinuz root=/dev/hda1 ro ### isk_size=100000 init=/etc/init lang=us apm=power-off nomce quiet vga=791
initrd /boot/initrd.img
savedefault
boot
title Debian GNU/Linux, kernel 2.6.12
root (hd0,0)
kernel /boot/vmlinuz-2.6.12 root=/dev/hda1 ro ### isk_size=100000 init=/etc/init lang=us apm=power-off nomce quiet vga=791
initrd /boot/initrd.img-2.6.12
savedefault
boot
title Debian GNU/Linux, kernel memtest86
root (hd0,0)
kernel /boot/memtest86.bin
boot
title Debian GNU/Linux, kernel memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
boot
### END DEBIAN AUTOMAGIC KERNELS LIST
-
I am having the exact same problem as pt-1. My menu.lst file looks identical to the one posted above.
I am trying to install Knoppix 4.0 as a VMWare Workstation 5.0 image.
PC specs are:
P4 3.4GHz HT
2GB RAM
VMWare image is setup to use 512MB RAM, 10GB HD, and full processor power.
If anyone know how to remedy this, I would greatly appreciate it. Thanks in advance!
-
servus
ich habe fast die gleiche Fehlermeldung:
Kernel Panic - not syncing: VFS : Unable to mount roof fs on unknown-block(3,3)
knoppix ist auf hda3 installiert.
hier der auszug aus der menu.lst:
title Debian GNU/Linux, kernel 2.6.12 Default
root (hd0,2)
kernel /boot/vmlinuz root=/dev/hda3 ro ### isk_size=100000 init=/etc/init lang=de apm=power-off nomce quiet vga=791
initrd /boot/initrd.img
savedefault
boot
was ist denn falsch daran?
-
So has any one actually found a solution to this problem yet
-
Same problem here.
I have installed the knoppix CD to /dev/hda2
I also found that when I do the following I have no permissions to /dev :
Code:
mount /dev/hda2
chroot /mnt/hda2 /bin/bash
There is something wrong with /dev. I got a lot of messages which says it has no permission to /dev/null.
Also grub couldn't find a harddisk (also permission problem, I think) and lilo gives me also permission problems. Seems that the installer don't create the /dev directory correctly.
I have tried to link the original /dev to /mnt/hda2/dev. But that doesn't the trick. I also tried to chmod 777 en chmod root:root (as long I'm logged in as root) the whole /dev. But it wasn't a succes.
I'm also stuck...
-
Problem "Kernel Panic - not syncing: VFS" - Eine L
Hallo,
ich relebte auch das Problem "Kernel Panic - not syncing: VFS" mit KNOPPIX V4.0.2CD,
und eine Loesung gefunden. Habe gerade auch in einer anderen Stelle vorgestellt;
http://www.knoppix.net/forum/viewtopic.php?t=21272
Einfach den Eintrag " ### isk_size=100000 ...usw." in /boot/grub/menu.lst umschreiben wie folgt:
"ramdisk_size=100000 ...usw."
Mir ist nicht klar, ob dieses "###" absichtlich eingesetzt wurde oder wegen eines Bugs in knoppix-installer.
Jedenfalls hat diese Loesung funktioniert, mindestens bei mir.
Ich hoffe es kann Euch helfen.
Similar Threads
-
By Honkeychops in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 05-23-2008, 01:05 AM
-
By beige_matchbox in forum MS Windows & New to Linux
Replies: 3
Last Post: 03-05-2005, 12:38 PM
-
By eXploit in forum General Support
Replies: 4
Last Post: 02-12-2005, 02:23 PM
-
By ChronusDark in forum General Support
Replies: 2
Last Post: 05-12-2004, 11:08 PM
-
By Skywing in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 06-30-2003, 05:38 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Fanxiang SSD 4TB 2TB 1TB PS5 SSD M.2 NVME SSD 7300MBS PCIe 4.0 Solid State Drive
$237.49
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5''SATA III Internal Solid State Hard Drive LOT
$188.99
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$109.99
SAMSUNG SSD 870 EVO 1TB 500GB 250GB 2.5 inch SATA III 3 Solid State Drive US
$97.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$13.99
Crucial MX500 CT250MX500SSD1 250 GB SATA III 2.5 in Solid State Drive
$14.99
SSDSC2BB600G4 INTEL DC S3500 Series 600GB 6G SATA 2.5" SSD
$25.00
Fanxiang M.2 SATA SSD 1TB 2TB 512GB 256GB NGFF M2 Internal Solid State Drive Lot
$21.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot
$104.99
4 TB SSD SATA III Drive 2.5" Solid State Drive SATAIII 6Gb/s UP to 540MB/s
$149.00